MALIIGAZA Official Store
Ultra-Thin IP68 Waterproof COB LED Strip 5mm Width High Brightness 12V 24V Neon Glow LED Tape Rope Light Indoor Outdoor Decor
Ultra-Thin IP68 Waterproof COB LED Strip 5mm Width High Brightness 12V 24V Neon Glow LED Tape Rope Light Indoor Outdoor Decor
Couldn't load pickup availability
Ultra-Slim Architectural Lighting built for the Toughest Environments
Meet the MALIIGAZA 5mm IP68 Waterproof COB LED Strip Light. Engineered with a micro-width 5mm profile and high-density continuous COB technology (400 LEDs/m), this ultra-thin LED tape delivers spot-free, museum-grade illumination (CRI 90+) across both harsh outdoor landscapes and delicate indoor accent features.
Seamless Linear Illumination Without Hotspots
Traditional SMD LED strips often suffer from visible dotting, harsh glare, and bulky weatherproof housing that ruins sleek architectural lines. Over time, lower-grade PVC coatings turn yellow, crack, and let moisture destroy internal circuitry.
The MALIIGAZA FOB-5MM-IP68 completely redefines linear LED tape lighting. Encapsulated in high-grade weather-proof extrusion silicone, this continuous ribbon offers flawless edge-to-edge light emission while maintaining an astonishingly slim 5mm overall profile. Designed for tight recesses, under-cabinet channels, outdoor gardens, and wet environments, it brings professional-tier lighting to your custom installations.
Why Choose MALIIGAZA COB LED Technology?
- Micro-Slim 5mm Design: Fits where conventional 8mm or 10mm waterproof LED strips cannot. Ideal for tight architectural channels, tile gaps, and hidden cabinet lips.
- Spot-Free COB Illumination: Packed with 400 LEDs per meter, eliminating harsh dark spots or dotted pixelation for a smooth, unbroken beam of light.
- True IP68 All-Weather Submersion: Encased in non-yellowing, anti-freeze, and UV-resistant meteorological silicone for long-term outdoor, garden, and bathroom usage.
- Museum-Grade Color Rendition (CRI > 90): Reveals true, vivid colors under warm white (3000K), natural white (4000K), or cold white (6000K) spectrums.
- Safe Low-Voltage Operation: Powered by safe DC 12V or 24V extra-low voltage, ensuring safe touching during maintenance and installation.
Engineered Performance Features
Weatherproof Silicone Extrusion
Unlike cheap PVC strips that become brittle under direct sunlight or extreme freezing temperatures, our solid meteorological silicone outer tube remains fully flexible, optically clear, and crack-resistant over years of continuous exposure.
High Density & High Efficiency
By placing 400 flip-chip diodes per meter, brightness reaches over 100 Lumens per Watt with low energy consumption (5W/m). Experience higher luminous efficacy with minimal heat dissipation on a 3mm internal PCB.
Strong Adhesive Backing & Flexibility
Comes pre-applied with industrial-grade self-adhesive tape for fast, reliable surface attachment. The ultra-flexible ribbon easily bends around curves, corners, and contours without damaging internal wiring.
Fully Dimmable Support
Seamlessly adjust brightness from 1% to 100% when paired with compatible DC PWM dimmers, smart LED controllers, or home automation systems.
Smart Home & Automation Ready
Integrate your MALIIGAZA COB LED strip into modern smart home ecosystems. By pairing this strip with an external smart controller (sold separately), you can unlock full voice control, mobile app dimming, motion sensor triggers, and automated lighting schedules.
Supported Ecosystems (via external controller): Apple HomeKit, Google Assistant, Amazon Alexa, Zigbee 3.0, Tuya Smart Life, and Philips Hue Bridge setups.
Versatile Application Scenarios
Outdoor & Landscape
Garden pathways, roof eaves, patio steps, deck railings, and exterior architectural facade highlights.
Kitchens & Bathrooms
Under-cabinet task lighting, shower niches, vanity mirrors, toe-kicks, and splash zones.
Accent & Commercial
Narrow alcoves, tile joints, display cases, artwork backlighting, bar counters, and retail shelving.
Technical Specifications
| Model | FOB-5MM-IP68 |
| Outer Silicone Width / PCB Width | 5mm Outer Casing (3mm Internal PCB) |
| Profile Thickness | 3mm Total Thickness |
| Operating Voltage | DC 12V / DC 24V (Choose specific variant) |
| Power Consumption | 5 Watts / meter |
| LED Density | 400 Chips per meter |
| Color Rendering Index (CRI) | RA > 90 |
| Luminous Efficacy | > 100 LM/W |
| Waterproof Protection Grade | IP68 Submersible / All-Weather Protection |
| Available Color Temperatures | Warm White (3000K) / Natural White (4000K) / Cold White (6000K) |
| Standard Reel Lengths | 1 Meter to 5 Meters continuous options |
What Is Included In the Box?
- 1x MALIIGAZA 5mm IP68 Waterproof COB LED Strip Reel (Selected length & voltage)
Note: Power supply transformer and LED dimmer controller are NOT included and must be purchased separately.
Installation & Customization Guide
- Surface Preparation: Clean the mounting surface thoroughly with rubbing alcohol to remove oil and dust. Ensure it is completely dry before mounting.
- Cutting to Size: If trimming is required, cut only at designated copper cut-mark lines printed on the strip.
- Resealing for IP68 Waterproofing: After cutting, you MUST inject waterproof silicone sealant glue inside dedicated end caps and cover cut edges tightly. Allow 24 hours to cure before exposure to water.
- Mounting: Peel back the protective adhesive film slowly and press the strip firmly along the target channel or surface.
- Wiring & Power On: Wire positive (+) and negative (-) leads correctly into your DC 12V or 24V transformer output terminals. Connect transformer to AC mains wall outlet.
Troubleshooting Common Setup Issues
1. Strip fails to light up after connecting power?
Check polarity. DC connections are direction-sensitive. Swap positive (+) and negative (-) terminal leads. Ensure transformer output matches strip voltage.
2. Lights flicker or drop brightness towards the end?
This indicates insufficient power driver wattage or voltage drop over extended continuous runs. Ensure transformer wattage exceeds total strip consumption by 20-30% overhead.
3. Moisture entering cut ends?
Re-verify that dedicated silicone sealing caps were filled completely with waterproof silicone sealant during cutting installation.
Important Safety Warnings & Technical Requirements
- DO NOT CONNECT DIRECTLY TO HIGH-VOLTAGE MAINS: Never connect this DC LED strip directly to AC 110V or AC 220V wall power. Direct connection will permanently destroy the LEDs immediately and poses severe safety hazards.
- POWER SUPPLY REQUIRED: A separate DC 12V or DC 24V power adapter transformer is mandatory for operation (not included).
- MATCH VOLTAGE ACCURATELY: Use a 12V power supply for 12V strips, and a 24V power supply for 24V strips. Using incorrect voltage will cause failure or overheating.
- WATTAGE OVERHEAD RULE: Always choose a transformer whose continuous wattage output is at least 1.3x to 1.5x higher than the combined theoretical total wattage of connected LED strips.
Frequently Asked Questions
What is the width and thickness of this waterproof COB strip?
The internal PCB strip width is 3mm, while the external protective IP68 silicone casing measures exactly 5mm wide by 3mm thick, making it one of the slimmest waterproof LED light strips available.
Is this COB LED strip fully submersible under water?
Yes, it features an IP68 protection rating sealed within high-density meteorological silicone, suitable for gardens, water features, swimming pool edges, and outdoor weather exposure.
Does this LED strip come with a power supply?
No, the power transformer adapter is not included. You must select and purchase a separate DC 12V or 24V power supply matching your strip voltage selection.
Can I dim this COB LED strip light?
Yes, the strip is 100% dimmable. You will need to install a compatible DC LED dimmer switch or smart controller between the power supply and the light strip.
How do I cut and re-seal the strip without losing waterproof rating?
Cut along the designated copper pad cut lines. To maintain IP68 water resistance, seal the exposed cut ends using dedicated silicone end caps filled with outdoor-grade waterproof silicone sealant glue.
Should I choose DC 12V or DC 24V version?
For shorter runs under 5 meters, 12V is great. For longer continuous runs, 24V offers higher electrical efficiency and less voltage drop across the length of the strip.
Why is COB better than conventional SMD LED strips?
COB (Chip-on-Board) packs 400 LEDs/m under continuous phosphor covering, creating a seamless, uniform beam of light without visible diode dots or pixelated shadows typical of SMD tape.
Will the silicone sleeve yellow or turn brittle over time?
No. MALIIGAZA uses high-grade meteorological extrusion silicone that resists UV yellowing, cracking, and cold temperature freezing far better than standard PVC alternatives.
What power supply wattage do I need for a 5 meter strip?
A 5-meter strip consumes 25W (5W/m x 5m). Applying our 1.5x safety headroom factor, we recommend selecting a power supply rated for at least 36W or higher.
Is this strip compatible with Smart Home controllers like Alexa or Google Home?
Yes, simply wire the LED strip into any compatible 12V/24V Tuya, Zigbee, or Smart WiFi controller to enable smart voice commands and smartphone app controls.
What color temperature option should I pick?
3000K Warm White offers a cozy, inviting ambiance for living rooms and decks. 4000K Natural White delivers clean, accurate task lighting for kitchens and baths. 6000K Cold White delivers crisp daylight brightness.
What is the lifespan expectation for MALIIGAZA COB LED strips?
Engineered with premium copper PCB traces and high efficiency flip-chips, these strips are rated for over 50,000 operational hours when installed properly.
Upgrade Your Architectural Ambiance Today
Elevate your home, garden, or commercial space with ultra-slim, continuous spot-free lighting engineered to withstand the elements.
Fast Shipping ? Professional Support ? 100% Quality Guaranteed
Recommended Companion Products & Guides
- MALIIGAZA IP67 Waterproof DC Power Supply (12V/24V)
- Smart Tuya / Zigbee LED Dimmer Controller
- IP68 Silicone End Caps & Waterproof Sealant Kit
- How to Calculate Power Supply Wattage for LED Strips
- Step-by-Step Waterproofing Guide for Cut COB Tape
- Choosing Between 3000K, 4000K, and 6000K Color Temps
