1 / su 13

MALIIGAZA

MALIIGAZA STEP-SP32 Smart 32-Step Motion Sensor Stair Light Controller with LCD and Side Running Light

Prezzo di listino $95.61 USD

Prezzo di listino ~~$191.21 USD~~ Prezzo scontato $95.61 USD

In offerta Esaurito

Spese di spedizione calcolate al check-out.

Available offer

MA10OFF

Save 10% on eligible products. One use per customer.

Enter at checkout. Eligibility and discount combinations are confirmed at checkout.

Model SP32 Controller OnlyVariante esaurita o non disponibile Wireless Panel Switch x 1Variante esaurita o non disponibile 5m 3000K COB StripVariante esaurita o non disponibile 5m 4000K COB StripVariante esaurita o non disponibile 5m 6000K COB StripVariante esaurita o non disponibile 5m 3000K SPI COBVariante esaurita o non disponibile 5m 4000K SPI COBVariante esaurita o non disponibile 5m 6000K SPI COBVariante esaurita o non disponibile 5m RGB SPI COB StripVariante esaurita o non disponibile 30m 2Pin WireVariante esaurita o non disponibile 50m 2Pin WireVariante esaurita o non disponibile 100m 2Pin WireVariante esaurita o non disponibile 20pcs Fast ConnectorVariante esaurita o non disponibile 200W Power Supply + PlugVariante esaurita o non disponibile 300W Power Supply + PlugVariante esaurita o non disponibile 400W Power Supply + PlugVariante esaurita o non disponibile

Quantità Quantità

(0 nel carrello)

Smart Stair Lighting With Step Lights + Side Running Light

The MALIIGAZA STEP-SP32 is an intelligent motion sensor stair light controller designed for flexible DIY staircase lighting. It can control up to 32 stair steps while also driving a side running light installed along a handrail, wall, or staircase edge.

Build a Stair Lighting System Around Your Space

Instead of limiting you to one fixed kit configuration, STEP-SP32 is designed as a modular stair lighting platform. You can combine the controller with the step count, step-light color, SPI running strip, power supply, wireless wall switch, connectors, extension cables, and other accessories that fit your staircase.

Dual PIR sensors detect movement from the top or bottom of the stairs. When movement is detected, the lighting sequence starts from the corresponding direction, creating an automatic step-by-step lighting effect while the optional side running light can flow together with the staircase illumination.

Core Benefits

Step Lighting + Side Running Light

Create step-by-step staircase lighting while a separate running light travels along the side wall, handrail, or staircase edge.

Up to 32 Stair Steps

Supports staircase installations with up to 32 steps, making the controller suitable for a wide range of indoor residential staircase layouts.

Dual-Direction PIR Detection

Install one PIR sensor at the bottom and one at the top. Bottom detection starts the lighting sequence upward, while top detection starts the sequence downward.

LCD Parameter Display

The built-in LCD screen provides a clear view of controller settings, making configuration easier during installation and adjustment.

Optional Constant-On Wall Switch Control

Add the optional wireless wall switch and change to wireless switch mode when you want the staircase lighting to stay continuously illuminated instead of operating only by motion detection.

Advanced Stair Lighting Control

7 Step Lighting Modes Choose from multiple step lighting effects to customize how the staircase illuminates.

5 Running-Light Opening Modes Select different flowing effects when the side running light turns on.

5 Running-Light Closing Modes Customize how the side running light finishes its lighting sequence.

Adjustable Parameters Configure step count, brightness, lighting speed, timing, and other operating parameters from the controller.

Daylight Sensor Control Set the ambient light sensitivity so the system can remain inactive when surrounding light is already sufficient.

Independent Step Channels Each of the 32 step channels can be controlled independently. If one channel is not required or develops a fault, it can be disabled without disabling the complete system.

Flexible LED Strip Compatibility

The stair-step outputs are designed for 12V or 24V single-color LED step lighting.

The SPI lighting function supports compatible 12V or 24V SPI single-color, CCT, RGB, RGBW, and RGBCCT LED strips, with support for up to 1021 pixels.

This flexible architecture allows DIY users to create single-color running effects, colorful RGB-style flowing effects, or more advanced SPI lighting combinations depending on the selected strip.

Recommended Step Light Strip With Extension Cable

For STEP-SP32 stair-step lighting, we also recommend our 24V COB stair light strip with extension cable.

This option is available with 1m or 1.2m LED strips and matching extension cable lengths from 1m to 6m, making it easier to route each step light back to the controller in different staircase layouts.

View 24V COB Stair Light Strip With Extension Cable

Please select the appropriate strip length and extension cable length according to your staircase dimensions and controller installation position.

Three Ways to Build Your Stair Lighting

1. Dynamic Step Lighting

Use individual step light strips to create sequential illumination across the staircase.

2. Side Running Light

Install a compatible SPI strip along a handrail, staircase wall, or side edge for flowing light effects.

3. Step Lighting + Running Light

Combine both systems so the stair steps illuminate while the side running light travels along the staircase at the same time.

Application Scenarios

Home Staircases
Automatic lighting for everyday indoor staircase use.

Home Renovation
Add dynamic staircase lighting during renovation or interior upgrades.

DIY Lighting Projects
Build a customized system with your preferred number of steps and compatible strips.

Modern Interior Lighting
Combine functional stair illumination with decorative flowing light effects.

Technical Specifications

Brand	MALIIGAZA
Model	STEP-SP32
Product Type	Intelligent Motion Sensor Stair Light Controller
Application	Indoor Stair Lighting
Maximum Stair Steps	32 steps
Motion Detection	Dual PIR sensors for top and bottom activation
Display	Built-in LCD display
Step Lighting Modes	7 modes
Running Light Opening Modes	5 modes
Running Light Closing Modes	5 modes
Daylight Detection	Adjustable ambient light sensing
Step Strip Support	12V / 24V single-color LED strips
SPI Strip Support	12V / 24V SPI single-color, CCT, RGB, RGBW, RGBCCT
Maximum SPI Pixel Count	Up to 1021 pixels
Independent Step Control	32 independently controllable step channels
Wireless Wall Switch	Supported, optional accessory
Constant-On Mode	Available when configured for wireless switch control

Modular SKU System - Please Choose Your Components Carefully

This listing is designed for customized DIY combinations rather than one fixed standard kit.

The controller, step LED strips in different colors, single-color or addressable running strips, wireless switch, power supply, connectors, extension cables, and other accessories may be offered as separate SKUs in the same listing. What you receive depends on the SKU or combination you select.

Package Includes

Package contents depend on the selected SKU.

Controller SKU: STEP-SP32 controller only unless otherwise stated in the selected option.
LED strips are not automatically included with the controller.
Power supply is not automatically included with the controller.
Wireless wall switch is optional and must be selected separately when required.
Additional strips, connectors, extension cables, and accessories can be selected according to your project.
Always check the selected SKU name and product option before placing your order.

Basic Installation Guide

Plan the number of stair steps and determine whether you want step lighting only, side running light only, or both.
Choose 12V or 24V components and keep the voltage consistent across the LED strips and power supply.
Install the step LED strips and connect each required stair channel to the controller.
If using individual step strips with extension cables, choose suitable cable lengths according to the distance between each step and the controller.
If using the running-light function, install the compatible SPI LED strip along the handrail, wall, or staircase side.
Install one PIR sensor near the bottom of the staircase and one near the top.
Connect the controller to the correct 12V or 24V DC power supply. Never connect the controller directly to AC mains voltage.
Configure the number of steps, brightness, timing, speed, daylight sensitivity, lighting modes, and other required parameters on the controller.
When using an SPI running strip, set the pixel number to match the actual pixel count of the installed strip.
Test activation from both the bottom and top of the staircase before completing the final installation.

Troubleshooting Guide

The lights do not turn on when movement is detected

Check the power supply voltage, PIR sensor connections, step configuration, and daylight sensitivity setting. If the surrounding area is bright, the daylight sensor setting may prevent activation.

The side running light does not align correctly

Verify that the configured pixel number matches the actual pixel count of the connected SPI strip.

One stair channel is not required or is not operating correctly

STEP-SP32 supports independent channel control. The affected step channel can be disabled without shutting down the remaining staircase lighting system.

The lights do not stay continuously on

Constant-on operation requires the optional wireless wall switch and the appropriate wireless switch operating mode.

The system behaves incorrectly after changing components

Confirm that the LED strip voltage and power supply voltage match. Do not use a 12V LED strip with a 24V power supply.

Important Safety and Compatibility Notes

Never connect the STEP-SP32 controller directly to AC 220V mains power. Direct AC connection can immediately damage the controller.
The controller must be powered through a suitable 12V or 24V DC power supply.
The LED strip voltage and power supply voltage must match.
Do not connect a 12V LED strip to a 24V power supply.
When using an addressable SPI running strip, set the controller pixel number to match the actual strip pixel count.
The controller, LED strips, power supply, wireless wall switch, connectors, extension cables, and accessories may be separate SKUs. Check the selected option before ordering.
This product is intended for indoor staircase lighting applications. No waterproof IP rating is specified for the controller.

MALIIGAZA STEP-SP32 intelligent motion sensor stair light controller

STEP-SP32 smart 32-step stair light controller with LCD display

Motion sensor stair lighting controller with dual PIR sensors

32-step LED staircase controller for automatic step-by-step lighting

STEP-SP32 stair controller with step lights and side running light

MALIIGAZA stair light controller with adjustable LCD settings

Dual PIR stair controller with top and bottom motion activation

12V 24V smart stair light controller for indoor staircase lighting

SPI addressable stair lighting controller for side running light effects

STEP-SP32 controller supporting single color CCT RGB RGBW RGBCCT SPI strips

Addressable pixel stair controller supporting up to 1021 pixels

STEP-SP32 staircase controller with independent 32-channel step control

Stair light controller with optional wireless wall switch constant-on mode

DIY motion activated staircase lighting system with step and running lights

Frequently Asked Questions

1. How many stair steps can the STEP-SP32 controller support?

It supports up to 32 stair steps.

2. Can STEP-SP32 control both stair lights and a side running light?

Yes. It can operate step-by-step stair lighting and a separate running light installed along a wall, handrail, or staircase side.

3. Does the controller include LED strips and a power supply?

Not automatically. The controller, LED strips, power supply, wireless switch, connectors, extension cables, and other accessories may be sold as separate SKUs. Check your selected option before ordering.

4. How does the dual PIR motion sensor stair lighting work?

A sensor can be installed at each end of the staircase. Detection at the bottom starts the lighting sequence from the bottom, while detection at the top starts it from the top.

5. Can the stair lights stay on continuously?

Yes. Constant-on operation is available when the optional wireless wall switch is used and the controller is switched to the appropriate wireless switch mode.

6. What voltage does the STEP-SP32 stair controller use?

The system is designed for compatible 12V or 24V DC lighting. Never connect the controller directly to AC 220V mains power.

7. Can I use RGB or RGBCCT addressable LED strips?

The SPI lighting function supports compatible 12V or 24V SPI single-color, CCT, RGB, RGBW, and RGBCCT strips. The stair-step outputs are intended for 12V or 24V single-color step lighting.

8. How many addressable pixels can the controller support?

The SPI function supports up to 1021 pixels.

9. Why does the stair light not activate during the daytime?

The controller includes adjustable daylight sensing. Depending on the configured light threshold, it can remain inactive when ambient lighting is already sufficient.

10. What should I do if one stair channel has a problem?

Each of the 32 step channels can be independently controlled. An affected channel can be disabled without stopping the rest of the system.

11. How many lighting modes are available?

The controller provides 7 step lighting modes plus 5 opening and 5 closing modes for the running-light function.

12. Is the controller waterproof?

No waterproof IP rating is specified for the STEP-SP32 controller. It is intended for indoor staircase lighting installations.

13. Does the controller work with WiFi, Zigbee, Alexa, or Google Home?

No WiFi, Zigbee, Alexa, Google Home, or app integration is specified for this model. Its documented external manual control option is the compatible wireless wall switch.

14. Why does my SPI running light stop or start at the wrong position?

Check the pixel-number setting and make sure it matches the actual number of pixels in the installed SPI strip.

15. Can I mix 12V and 24V components?

Do not connect components with mismatched operating voltages. The LED strip and power supply must use the same voltage specification.

16. Can I use step light strips with long extension cables?

Yes. For 24V stair lighting, we offer compatible 1m and 1.2m COB step light strips with extension cable options from 1m to 6m for flexible staircase installation.

17. What is the expected LED lifespan?

The STEP-SP32 is a controller and the LED strips can be selected separately, so LED lifespan depends on the specific strip and operating conditions.

Create a Stair Lighting System That Fits Your Project

Choose the STEP-SP32 controller, then match the step count, LED strips, SPI running light, power supply, wireless switch, extension cables, and accessories to your staircase design.

Select Your Required Components Above