MALIIGAZA Addressable COB RGBIC LED Strip Kit | 24V, 720 LEDs/m, 1–30m

MALIIGAZA addressable COB RGBIC LED strip kit for smooth, dynamic indoor accent lighting. Build a DC24V layout from 1m to 30m with 720 LEDs/m, white or black PCB, and three remote choices for ceilings, media rooms, displays, bars, and architectural features.

Standard RGB normally applies one selected color across the whole controlled run.

Addressable RGBIC / SPI transmits data along the strip so multiple controlled sections can display different colors within one effect. The effect changes by section rather than controlling every individual LED independently.

The selected kit is configured around the chosen LED strip length, PCB color, and remote style, with matching controller and power components for that option. Quantities and the way long kits are divided can vary by length. Verify the selected variant and current package details before ordering.

• The IP30 configuration is intended for dry indoor use only.
• Never connect the LED strip directly to AC mains power. Use matching DC24V components.
• RGBIC is decorative colored lighting; RGB color mixing does not replace a dedicated high-quality white-light source.
• Keep the strip unrolled during full-output testing and do not cover it with insulating material.
• Observe signal direction, polarity, cut marks, and controller capacity when extending or reconnecting sections.
• Adhesive performance depends on the surface and preparation; add a suitable mechanical mounting method where the project requires it.

What does addressable RGBIC mean?

It means the controller can address sections along the strip, allowing multiple colors to appear within the same compatible effect instead of forcing one color across the entire run.

Is every LED individually controlled?

No. The strip operates in addressable sections controlled by the RGBIC/SPI system. The LEDs within a section follow that section's data rather than acting as 720 independent pixels per meter.

Which length should I order?

Measure the full route and add only the material genuinely required for corners and feeds. For 10m–30m projects, confirm how the selected kit divides the total length before installation.

Can I install 30m as one continuous end-fed strip?

Do not assume that configuration. Long kits may be arranged as multiple sections and feeds. Use the selected package layout and plan controller capacity, wiring, and DC24V power distribution accordingly.

What is the difference between white and black PCB?

The PCB choice changes the visible board color when the strip is off. Choose the color that best blends with the mounting surface; the core RGBIC lighting function remains the same.

Can I cut the strip?

Yes, only at the printed cut points on the selected strip. Exact spacing should be taken from the physical strip, and every reconnection must preserve signal direction and DC24V polarity.

Can I use this outdoors?

No. The current product classification is IP30 for dry indoor use. The strip and kit components must be protected from water, condensation, and outdoor weather.

Does the kit support app and voice control?

Yes. The compatible Tuya controller supports the Tuya Smart or Smart Life app and can link with compatible Alexa or Google Assistant services for supported commands.

Can it produce white light?

RGB mixing can create a white-like decorative effect, but this kit has no dedicated white channel. Choose RGBW, RGBCCT, or a white COB strip when white-light quality is a priority.

What should be tested before permanent installation?

Test every strip section, controller connection, remote, color, effect, app function, and planned power feed while the system is accessible and the strips are unrolled.

Build the RGBIC layout around the real route

Before adding to cart, confirm length, section layout, white or black PCB, preferred remote, feed points, and a dry indoor installation location.