Shenzhen Cooleeon Electronics Co., Ltd.
MALIIGAZA IP67 Waterproof COB LED Strip Connector - Solderless Fast Connector for 8mm & 10mm PCB Smart Home Lighting
MALIIGAZA IP67 Waterproof COB LED Strip Connector - Solderless Fast Connector for 8mm & 10mm PCB Smart Home Lighting
Impossibile caricare la disponibilità di ritiro
Seamless, Solderless & Strictly Waterproof: Connect and extend your outdoor or indoor IP67 COB LED strips effortlessly with the MALIIGAZA Precision-Molded Fast Connector System. Engineered with flame-retardant materials, piercing copper terminals, and full support for 8mm and 10mm PCB COB tapes.
Professional Outdoor Lighting Connections Made Simple
Tired of delicate soldering irons, bulky heat-shrink tubes, and unreliable connections that short-circuit outdoors? The MALIIGAZA FOB-LJQ-IP67 Waterproof COB LED Fast Connector Series eliminates complex wiring and delivers a secure, professional-grade splice in seconds. Whether you are running long linear architectural runs, navigating 90-degree corners, or sealing custom dead-ends, our comprehensive 2-pin connector kit provides absolute peace of mind for both low-voltage and high-voltage COB strip installations.
Why Engineers & DIY Enthusiasts Choose MALIIGAZA
âš?Tool-Free Toolless Installation
No strip peeling, no soldering, and no special tools required. Simply insert your cut COB tape and clamp down for instant conductivity.
🛡 Flame-Retardant & Safe
Constructed with premium v0-rated flame-retardant polymers that withstand high operating temperatures, preventing thermal deformation and fire hazards.
💧 IP67 to IP68 Waterproofing
Factory sealed for full moisture resistance. Inject standard silicone sealant before clamping to upgrade your seal to submersible IP68 rating.
âš?High-Voltage Capability
Precision-molded copper contacts handle high current loads and high-voltage strips without voltage drops, buzzing, or flickering.
Precision Engineering for Uncompromised Performance
- �/span> Direct Contact Piercing Needles: Specially angled copper contacts bite through solder pads directly, creating a stable current bridge without stripping insulation.
- �/span> Full-Spectrum Connector Options: Choose from Board-to-Board (PCB-PCB), Board-to-Wire (PCB-Wire), Wire-to-Board-to-Wire, L-Shape 90-degree turn connectors, and sealed End Caps.
- �/span> Anti-Aging Shell Construction: Cheap competitors degrade under UV exposure and break down within months. MALIIGAZA utilizes UV-stabilized polycarbonate for long outdoor service life.
- �/span> Zero Dark-Spot Profile: Compact housing design maintains uninterrupted, dot-free continuous lighting without casting heavy shadows on your light diffuse lenses.
🏡 Smart Home Lighting Integration
Fully compatible with PWM dimmers, Zigbee controllers, Homekit dimming modules, and smart switches. Ensures zero signal degradation or impedance resistance across extended smart outdoor lighting zones.
Versatile Application Scenarios
Outdoor Patio & Decking
Architectural Facades
Under-Cabinet & Kitchens
Bathroom & Wet Locations
Technical Specifications
| Parameter | Specification Details |
|---|---|
| Model Series | FOB-LJQ-IP67 |
| Supported PCB Widths | 8mm PCB / 10mm PCB (COB LED Strips) |
| Pin Count / Voltage Range | 2-Pin Single Color (5V, 12V, 24V, High Voltage) |
| Waterproof Rating | IP67 Standard (IP68 achievable with sealant) |
| Material Composition | V0 Flame-Retardant Polycarbonate + Phosphor Copper Contacts |
| Connector Configurations | PCB to PCB, PCB to Wire, Wire-PCB-Wire, L-Shape, End Cap |
Package Includes
Depending on your selected variant option:
- Selected Quantity of 8mm or 10mm MALIIGAZA IP67 Fast Connectors
- Matching Silicone Gel Seals (For terminal ends)
- Illustrated Step-by-Step Installation Manual
Quick Step-by-Step Installation Guide
- Measure & Cut: Cut your IP67 COB LED strip strictly along the designated copper pad cut lines.
- Check Polarity: Align the positive (+) and negative (-) terminals on the LED strip with the markings on the connector.
- Insert Strip: Slide the end of the COB strip inside the connector housing without stripping the outer silicone sleeve.
- Clamp Contact: Use pliers to press the metallic contacts down firmly until they pierce through the pads.
- Optional IP68 Seal: Inject waterproof silicone sealant inside before latching for full underwater waterproofing.
Troubleshooting Tips
- Light strip does not turn on? Ensure polarity is correct (+ to + and - to -). Check if the internal copper needles have fully pierced the PCB copper pads.
- Flickering light? Re-clamp the connector cover to ensure complete physical contact with the terminals.
âš?CRITICAL SIZING & SAFETY NOTICE
- DO NOT MEASURE THE SILICONE TUBE: Sizes are based on the internal PCB width, NOT the external jacket. An 8mm PCB strip with a jacket measures ~10mm externally, but requires an 8mm connector. A 10mm PCB strip measures ~12mm externally, but requires a 10mm connector.
- COB EXCLUSIVE: Designed specifically for continuous COB LED strips. Not compatible with standard SMD diode strips.
- POLARITY MATTERS: Double check positive and negative terminal orientation prior to clamping.
- ALWAYS CUT ON CUT MARKS: Cutting outside designated cut lines will break internal circuitry.
Frequently Asked Questions
How do I select the right size connector for my COB strip?
Always measure the bare copper PCB width inside the sleeve. If your light strip's internal board is 8mm, purchase an 8mm connector regardless of outer silicone thickness.
Are these connectors compatible with standard SMD LED strips?
No, these connectors are engineered specifically for continuous COB (Chip-on-Board) LED strip structures and will not fit traditional SMD chip layouts.
Can I use these solderless connectors outdoors in heavy rain?
Yes, the connectors are rated IP67 for weatherproof outdoor use. For submersed or direct water spray applications, fill the connector housing with silicone sealant before closing to achieve an IP68 seal.
Do I need to solder wires when making extended turns?
No, this solderless kit includes quick-connect L-shapes, PCB-to-Wire extension jumpers, and direct joiners to make custom installation completely solder-free.
Are these connectors fireproof and flame retardant?
Yes, they are manufactured using premium flame-retardant polymers that resist heat and eliminate electrical short fire hazards.
Will these connectors support high voltage COB strips?
Yes, MALIIGAZA connectors use thick phosphor-copper terminals capable of handling low voltage (5V/12V/24V) as well as higher voltage installations safely.
Can these connectors be reopened and reused?
While they are primarily designed for permanent, solid connections, they can be unlatched carefully using a small flathead tool if repositioning is needed.
How do the piercing needles work without stripping wires?
The engineered copper pins pierce through the PCB layer directly when pressure is applied, making direct metal-to-metal contact with the copper trace.
What happens if I cross positive and negative polarities?
The LED strip simply will not illuminate. Unclamp the strip, flip the strip orientation to match polarities (+ to +, - to -), and clamp again.
Do these cause dark gaps or shadows along the COB light strip?
No, our slim design minimizes spacing between connected strips, maintaining a continuous, uniform linear beam under diffuser channels.
Are these compatible with smart home light dimmers?
Yes, they do not restrict current or alter PWM frequencies, making them fully compatible with smart dimming ecosystems.
What wire gauge is supported for PCB-to-Wire variants?
They are engineered to accept standard 22 AWG to 20 AWG 2-pin extension wires effortlessly.
Upgrade Your Lighting Installation with MALIIGAZA Today
Eliminate cold solder joints, leak hazards, and setup headaches. Secure professional-grade, fire-safe waterproof connections now.
Select Your Connector Type & Order NowSuggested Related Products
�MALIIGAZA 24V IP67 Waterproof Outdoor COB LED Tape Light
�Neutral Waterproof Silicone Sealant Tube for LED Assembly
�Aluminum LED Channel Profile with Diffuser Lens
Recommended Guides & Articles
�How to Cut, Connect, and Seal Waterproof COB LED Strips Outdoors
�COB vs SMD LED Lighting: Understanding the Difference in Waterproofing
