Shenzhen Cooleeon Electronics Co., Ltd.
MALIIGAZA AC 110V 220V COB LED Strip - IP67 Waterproof 480 LEDs/m High CRI Direct Mains LED Tape 50m 30m 20m 10m
MALIIGAZA AC 110V 220V COB LED Strip - IP67 Waterproof 480 LEDs/m High CRI Direct Mains LED Tape 50m 30m 20m 10m
Impossibile caricare la disponibilità di ritiro
True AC COB LED Strip - No Transformer Required
MALIIGAZA high voltage COB LED strip operates directly from AC 110-130V or AC 220-240V. With 480 LEDs per meter, CRI over 90, IP67 silicone protection and up to 50m continuous length, it delivers bright, smooth and dot-free lighting for indoor and outdoor projects.
Bright, Uniform Light for Long Lighting Projects
Designed for installations where brightness, continuous light and long-distance performance matter, this AC COB LED tape combines high LED density with direct mains operation.
Unlike low-voltage LED strips that require a separate transformer, this strip is designed for direct AC power connection by a qualified professional.
Core Benefits
Direct AC Power
Available for AC 110-130V or AC 220-240V operation without a separate low-voltage transformer.
480 LEDs Per Meter
High-density COB construction creates a bright, continuous light line with no obvious light spots or dark gaps.
High CRI 90+
High color rendering helps illuminated surfaces and interior details appear more natural and visually accurate.
IP67 Silicone Protection
The strip is protected by a weather-resistant silicone outer layer for indoor and outdoor lighting applications.
High-Density COB Lighting
Traditional LED tape can show individual LED points, especially when installed without deep aluminum channels or diffusers.
This COB LED strip uses 480 LEDs per meter to create a smoother and more uniform illuminated surface while delivering high brightness at approximately 15W per meter.
Up to 50m Continuous Lighting
Available in lengths from 1m to 50m, this high voltage COB LED strip is designed for long continuous installations with excellent light consistency and without the voltage drop normally associated with long low-voltage LED strip runs.
Durable Silicone Construction
The COB strip is enclosed in a high-quality weather-resistant silicone layer designed to resist aging, discoloration and repeated bending while maintaining good light transmission.
The finished strip measures approximately 12mm wide and 5mm thick, while the internal PCB is 10mm wide.
Cuttable and Project Friendly
The strip can be cut only at its designated cutting marks. The AC 110V version has a specified cutting interval of 10cm.
Dedicated 10mm fast connectors are available separately for straight connections, corner installation and other project requirements. Compatible end sealing accessories should be used after cutting.
Smart Home Compatibility
This product listing includes the COB LED strip only. No smart controller is included.
If smart switching or automated control is required, consult a qualified electrician regarding a suitable external control solution designed for the applicable AC voltage and electrical load.
Application Scenarios
Long continuous lighting for architectural details and building contours.
Smooth ambient lighting for residential and commercial interiors.
IP67 protected lighting for suitable outdoor decorative installations.
Suitable for projects requiring continuous runs from 1m up to 50m.
Technical Specifications
| Product Type | High Voltage COB LED Strip |
| Brand | MALIIGAZA |
| Working Voltage | AC 110-130V or AC 220-240V |
| Power | 15W/m |
| LED Density | 480 LEDs/m |
| CRI | Ra >90 |
| Luminous Efficacy | 110 lm/W |
| Overall Width | 12mm with silicone tube |
| PCB Width | 10mm |
| Thickness | 5mm |
| Available Length | 1m to 50m |
| 110V Cutting Interval | 10cm at designated cutting marks |
| Protection | IP67 |
| Light Colors | Warm White, Natural White, Cold White |
| Application | Indoor and outdoor lighting |
Package Includes
- 1 x MALIIGAZA COB LED Strip in the selected specification and length
Note: Fast connectors, end caps and other installation accessories are not listed as included and should be purchased separately when required.
Installation Guide
- Plan the required strip length and identify the designated cutting positions before installation.
- Disconnect and isolate the electrical supply before any installation, cutting or connection work.
- Have the mains electrical connection completed and checked by a qualified professional.
- Clean the mounting surface so it is smooth, dry and free from dust or grease before applying the adhesive backing.
- Because the high voltage strip is relatively heavy, additional mounting clips are recommended for long-term mechanical support.
- After cutting, seal the exposed end using the dedicated end cap together with suitable silicone sealing material.
- Fully uncoil and lay out the strip before testing or operating it.
Troubleshooting Guide
Disconnect power and have a qualified electrician check the supply, connection and strip condition. Do not troubleshoot exposed mains connections while energized.
Check that the mounting surface is clean, smooth and dry. Use additional mounting clips where necessary.
Do not energize a section that has been cut outside the designated cutting position. Replace the damaged section as appropriate.
Disconnect power immediately and do not continue using the affected section until it has been professionally inspected and properly sealed.
Important Safety Warnings
- High voltage product: Installation and mains electrical connection must be performed or supervised by a qualified professional.
- Never operate the strip while it is still wound on the reel. Heat cannot dissipate correctly and the strip may overheat and become damaged.
- Always disconnect power before cutting, connecting, sealing, moving or servicing the strip.
- Cut only at the designated cutting marks. Cutting in another position can permanently damage the strip.
- Every cut end must be properly sealed with the dedicated end cap and silicone to prevent water ingress and electrical hazards.
- Do not use a damaged, poorly sealed or exposed strip section.
- For outdoor installations, all connection and termination points require appropriate protection against moisture and environmental exposure.
Frequently Asked Questions
Does this AC COB LED strip need a transformer?
No separate low-voltage transformer is required. The strip is designed for the specified AC 110-130V or AC 220-240V version.
Is this a real high voltage COB LED strip?
Yes. It is designed as a direct AC high voltage COB LED strip rather than a low-voltage strip that depends on a separate transformer.
How many LEDs are there per meter?
The strip uses 480 LEDs per meter for high brightness and a smooth, continuous COB lighting effect.
Is the LED strip waterproof?
The strip is specified as IP67 and protected by an outer silicone layer. Cut ends must be properly resealed after modification.
Can I use this COB LED strip outdoors?
Yes, the product is specified for indoor and outdoor lighting. Correct sealing and professional electrical installation are especially important outdoors.
How long can one continuous strip be?
Available lengths range from 1m to 50m, making the strip suitable for large continuous lighting projects.
Does a 50m LED strip suffer from voltage drop?
The high voltage design is intended to provide consistent lighting over long runs up to 50m without the voltage drop normally associated with long low-voltage strips.
Can the AC COB LED strip be cut?
Yes. Cut only at the designated cutting positions. The specified cutting interval for the 110V version is 10cm.
What connector width does this strip use?
The internal PCB is 10mm wide, so dedicated 10mm fast connectors designed for this strip should be selected.
Are fast connectors included?
The package information specifies one COB LED strip. Fast connectors and other installation accessories are available separately when required.
What is the CRI of this COB LED strip?
The strip has a specified CRI above 90 for more natural and accurate color rendering.
What light colors are available?
The provided specifications list Warm White, Natural White and Cold White versions.
Can I turn the strip on while it is still on the reel?
No. Always fully uncoil the strip before operation. Running it while wound on the reel can trap heat and damage the LEDs.
How should a cut end be protected?
Use the dedicated end cap together with silicone sealing material to protect the cut end against water ingress and electrical hazards.
Can I install this high voltage LED strip myself?
Because this is a mains-voltage product, electrical connection and installation should be performed or supervised by a qualified professional.
Does it have built-in smart home control?
No built-in smart controller is specified and the package includes the LED strip only. Consult a qualified electrician if an external control solution is required.
Create Long, Clean and Continuous Light
Choose the voltage, light color and length that match your project and build a bright, professional COB lighting installation with smooth high-CRI illumination.
Related Product Suggestions
- 10mm fast connectors for compatible AC COB LED strip
- Corner connectors for project turns
- Dedicated end caps for cut strip sections
- LED strip mounting clips for additional mechanical support
Related Blog Suggestions
- High Voltage vs Low Voltage LED Strip: What Is the Difference?
- COB LED Strip vs SMD LED Strip: Which Is Better for Continuous Light?
- How to Plan a Long LED Strip Lighting Project
- What Does CRI 90+ Mean for LED Lighting?
- How to Protect Cut LED Strip Ends in Outdoor Installations
