Smart Indoor Sensor Stair Light — Plug-In Main Line Design, No Complex Wiring

Upgrade your staircase with the MALIIGAZA Smart Indoor Sensor Stair Light Kit — the smarter, cleaner alternative to traditional stair lighting. Instead of running individual wires to every step, this system uses a single main line cable mounted along the staircase side. Each COB LED strip simply plugs in directly — faster installation, neater finish, zero hassle.

5 Reasons to Choose MALIIGAZA Over Competitors

• ✅ Main line plug-in design — no complex wiring per step (competitors require individual wiring)
• ✅ 480 LEDs/m premium COB strip — competitors use cheap SMD strips or low-density 320 LEDs/m
• ✅ Daylight sensor included — lights stay off during the day to save energy (most competitors lack this)
• ✅ True step-by-step dynamic lighting — each step lights up sequentially (competitors light all steps at once)
• ✅ 12 dynamic modes + remote control — full customization at your fingertips

Key Features

🔌 Easy Plug-In Main Line Installation

Mount one main line cable along the staircase side. Each LED strip plugs directly into the main line — no individual wiring per step. The result: a cleaner, faster, more professional installation that anyone can do.

⚠️ Note: Main line module spacing is 35cm (40cm version available, contact us for price difference). Please measure your stair tread spacing before ordering. If spacing exceeds 35cm, the main line can be extended using a 4-pin extension cable.

🧠 PIR Motion Sensor — Auto On/Off

Two PIR sensors detect movement and automatically activate the stair lights. When you leave, the lights switch off automatically. Sensor range and sensitivity are adjustable for different installation environments.

☀️ Daylight Sensor — Energy Saving

The integrated daylight sensor prevents the system from activating when ambient light is sufficient. Sensitivity is adjustable, or the sensor can be disabled entirely to suit your needs.

🌟 Step-by-Step Dynamic Lighting — 12 Modes

Choose from 12 dynamic lighting modes including sequential step-by-step illumination, multi-step activation, and more. Adjust speed, lighting duration (up to 200 seconds), and the number of active steps (up to 40 steps supported).

💡 Premium COB LED Strip — 480 LEDs/m, 90+ CRI

Each step uses a high-density COB LED strip delivering uniform, glare-free illumination with no visible hotspots.

• 480 LEDs/m ultra-dense COB technology
• Brightness: 1000–1100 LM/m (adjustable)
• CRI 90+ for accurate, natural color rendering
• Width: 8mm | Thickness: 2.2–2.5mm
• Cuttable every 50mm for custom fit
• Strong self-adhesive backing for secure mounting
• IP30 waterproof rating (indoor use)
• Available in 1m or 1.2m lengths per strip

🎨 9 Color Options + Custom Available

Choose from 9 standard colors. Custom colors and lengths are available — contact us for details.

Technical Specifications

COB LED Strip

• LED Type: COB | Density: 480 LEDs/m
• Voltage: DC 24V | Power: 10W/m
• Brightness: 1000–1100 LM/m | CRI: 90+
• Width: 8mm | Thickness: 2.2–2.5mm
• Strip Length: 1m or 1.2m per piece
• LED Cable Length: 20cm
• Cuttable: Yes (every 50mm)
• Waterproof: IP30 | Adhesive: Strong tape

Controller

• 12 dynamic lighting modes
• Supports up to 40 steps
• Adjustable brightness, speed, and hold time (max 200s)
• Remote control + on-controller configuration
• Main line spacing: 35cm (40cm version available)

Available Variants

• Steps: 12 / 16 / 20 steps
• Color Temperature: Warm White 3000K | Natural White 4000K | Cold White 6000K
• Strip Length: 1m (3.28ft) | 1.2m (3.94ft) per step

Package Includes

• 1× KLA-STEP-P5 Stair Light Controller
• 2× PIR Motion Sensors
• 1× Daylight Sensor
• 1× 5m PIR Sensor Extension Cable
• COB LED Strips × (matching selected step count)
• Main Line Cable × (matching selected step count)
• 1× 24V Transformer Power Supply (plug type assigned by destination country: US/EU/AU/UK)
• Mounting clips, screws, and connection accessories

Installation Guide

1. Measure stair tread spacing — must be ≤35cm for standard main line.
2. Mount the main line cable along the staircase side, following the arrow direction.
3. Clean stair surfaces — ensure they are flat, dry, and dust-free before applying strips.
4. Attach COB LED strips to each step using the self-adhesive backing.
5. Plug each strip into the main line connector.
6. Install PIR sensors and daylight sensor at appropriate positions.
7. Connect the controller and 24V power supply.
8. Power on and configure lighting modes, speed, and duration via remote or controller.

⚠️ Important Safety Notes

• 🚫 Never connect the controller or LED strips directly to AC 110V/220V. Use only the supplied 24V transformer.
• ⬆️ Install the main line in the correct arrow direction — reversed installation will prevent the system from working.
• 🔌 Install all LED strips before powering on. Do not install or remove strips while powered.
• 📏 Stair spacing >35cm? Contact us for the 40cm main line version (price difference applies).
• 🧹 Ensure mounting surfaces are clean and smooth before applying strips.
• ✅ Select the correct step count before ordering.

Frequently Asked Questions

Does it turn on automatically? Yes — PIR sensors activate the lights when motion is detected.

Will it stay off during the day? Yes — the daylight sensor prevents unnecessary activation in bright conditions.

Can I adjust brightness? Yes — brightness is adjustable via the controller or remote.

Can the strips be cut? Yes — cuttable every 50mm for a perfect fit.

How many steps are supported? Up to 40 steps (kit options: 12/16/20 steps).

Is a remote included? Yes — full remote control included.

Is it suitable for outdoor use? No — this product is designed for indoor staircase use only (IP30).