Shenzhen Cooleeon Electronics Co., Ltd.
MALIIGAZA COB LED Strip Light 5M, 3mm/5mm/8mm/10mm Wide, 12V/24V, High CRI 90 Flexible Dimmable LED Tape
MALIIGAZA COB LED Strip Light 5M, 3mm/5mm/8mm/10mm Wide, 12V/24V, High CRI 90 Flexible Dimmable LED Tape
Não foi possível carregar a disponibilidade de recolha
One COB LED Strip Collection. More Ways to Build Your Lighting.
Choose from 3mm, 5mm, 8mm or 10mm widths, DC 12V or 24V, and 10 lighting colors to match everything from narrow decorative channels to brighter indoor lighting projects.
Each strip is 5 meters long and uses high-density COB technology for a smooth, continuous-looking light line with CRI >90.
A Better Choice Than Conventional LED Tape for Smooth, Refined Lighting
Visible LED dots can make an installation look unfinished. MALIIGAZA COB LED strip light uses densely arranged LEDs to create a softer and more uniform illuminated surface.
With four strip widths, multiple LED densities, two low-voltage options and a wide selection of white and colored light, this product family gives DIY users and lighting installers more freedom to choose the right strip for each space.
Key Highlights
- Four Width Options: 3mm, 5mm, 8mm and 10mm COB LED strips.
- 10 Light Colors: 2700K, 3000K, 4000K, 6000K, golden yellow, red, green, blue, ice blue and pink.
- DC 12V or 24V: Select the voltage that matches your lighting system and power supply.
- High-Density COB Design: Up to 528 LEDs per meter depending on the selected width.
- CRI >90: Designed for better color rendering in indoor lighting applications.
- Dimmable: Brightness can be adjusted when used with a compatible PWM LED dimmer or controller.
- Cuttable and Flexible: Adapt the strip to cabinets, furniture, ceilings, walls and DIY lighting projects.
- Strong Adhesive Backing: Convenient installation on clean, smooth indoor surfaces.
Which COB LED Strip Width Should You Choose?
3mm Ultra-Narrow
Designed for very narrow gaps, slim profiles and compact decorative lighting.
Best for: Ambient light, furniture, display details and narrow installation spaces.
5mm Slim Strip
A narrow edge-free design with the solder pads positioned on the back for a cleaner illuminated surface.
Best for: Decorative lighting where strip width and visual appearance matter.
8mm High-Density
A wider strip designed for higher output than the ultra-narrow versions.
Best for: Cabinet lighting, kitchens, ceilings, feature walls and brighter decorative lighting.
10mm Maximum Output Option
The widest version supports the highest listed LED density in this product family.
Best for: Applications where stronger illumination is preferred.
High-Density COB Light Without the Traditional LED-Dot Look
Depending on the selected version, the strip uses 400, 480 or 528 LEDs per meter. The closely packed COB light source produces a more continuous and visually uniform light line than conventional low-density SMD LED tape.
The result is well suited to visible installations where smooth light quality is as important as brightness.
Choose the Right Light Color for Your Project
Warm decorative atmosphere.
Comfortable everyday warm lighting.
Balanced neutral illumination.
Clean and crisp white light.
Decorative warm accent lighting.
Bold decorative lighting.
Creative accent lighting.
Modern ambient lighting.
Cool decorative atmosphere.
Creative room and display lighting.
CRI >90 for More Natural-Looking Indoor Spaces
High color rendering helps furniture, surfaces, displays and interior finishes appear more natural under the white-light versions of the strip. This makes the COB tape suitable for cabinets, kitchens, bedrooms, shelves, background walls and other interior lighting projects.
Dimmable with a Compatible PWM Controller
This is a single-color PWM COB LED strip. Brightness can be adjusted when connected to a compatible single-color LED dimmer or PWM controller.
The dimmer, smart controller and power supply are not included. Smart-home functions, remote control or app control depend on the external controller you choose.
Flexible Control System Compatibility
The strip itself does not include WiFi, Bluetooth, Zigbee or RF functions.
If smart control is required, connect the strip to a compatible single-color PWM smart LED controller with the correct DC input and output voltage.
Convenient Connection Options
The 5-meter strip is supplied with a wire connection on one end and a DC connector on the other end.
This gives you more flexibility when connecting the strip to a compatible screw-terminal LED power supply or DC power adapter.
Ideal Indoor Applications
Under-cabinet and interior cabinet lighting.
Headboards, ceilings and ambient lighting.
Indirect and background illumination.
Accent lighting for furniture and displays.
Decorative indoor cove and indirect lighting.
Custom shapes, furniture projects and interior decoration.
Technical Specifications
| Brand | MALIIGAZA |
| Product Type | Single-color COB LED strip light |
| Length | 5 meters |
| Available Widths | 3mm / 5mm / 8mm / 10mm |
| Working Voltage | DC 12V / DC 24V, depending on selected variant |
| Listed Power Options | 7W/m, 10W/m, 11W/m or 14W/m depending on selected version |
| 3mm LED Density | 400 LEDs/m |
| 5mm LED Density | 400 LEDs/m |
| 8mm LED Density | 480 LEDs/m |
| 10mm LED Density | 528 LEDs/m |
| Color Rendering Index | CRI / Ra >90 |
| Listed Luminous Efficiency | >100 lm/W |
| IP Rating | IP30 - non-waterproof |
| Dimming | Supported with compatible PWM dimmer/controller |
| Available Colors | 2700K / 3000K / 4000K / 6000K / Golden Yellow / Red / Green / Blue / Ice Blue / Pink |
| Cutting | Cut length varies by width and voltage. Always cut only at the marked cutting position on the strip. |
Package Includes
1 x 5M COB LED Strip Light
Power supply and LED controller are NOT included.
Basic Installation Guide
- Confirm whether your strip is the DC 12V or DC 24V version.
- Choose a power supply with exactly the same output voltage as the LED strip.
- For power capacity, a power supply rated above the calculated strip load is recommended. For added operating margin, approximately 1.5 times the theoretical strip wattage is preferred.
- Clean and dry the installation surface before removing the adhesive backing.
- Connect the strip with correct polarity.
- If cutting is required, disconnect power first and cut only at the marked cutting point.
- Unroll the strip before extended operation so heat can dissipate properly.
Troubleshooting Guide
The LED strip does not turn on
Check the power supply voltage, wiring polarity, connections and whether the power supply has sufficient output capacity.
The strip is dimmer than expected
Confirm that the selected strip width and power version match your brightness requirements and that the power supply is correctly sized.
The strip becomes excessively hot
Switch off power and make sure the strip is fully unrolled. Do not operate the strip while it remains tightly wound on the reel.
The dimmer does not work correctly
Confirm that the dimmer is designed for single-color PWM LED strips and is compatible with the strip voltage and total load.
Important Safety Information
- NEVER connect this LED strip directly to AC 110V, 120V, 220V or 230V mains electricity. Direct mains connection can immediately damage the strip and create a serious electrical hazard.
- Use only the correct DC power supply: DC 12V strip with a DC 12V power supply, and DC 24V strip with a DC 24V power supply.
- Power supply is not included.
- LED controller or dimmer is not included.
- Do not operate the LED strip while it is tightly wound on the reel. Heat may accumulate and damage the strip.
- Use a suitably rated power supply. Approximately 1.5 times the theoretical strip wattage is recommended for additional operating margin.
- IP30 indoor product. Keep away from rain, splashing water and outdoor exposure.
Frequently Asked Questions
1. What is the difference between the 3mm, 5mm, 8mm and 10mm COB LED strips?
The 3mm and 5mm versions are ultra-narrow and designed for compact installation spaces and decorative lighting. The 8mm and 10mm versions are wider and better suited to higher-output lighting applications.
2. Is this COB LED strip 12V or 24V?
Both DC 12V and DC 24V versions are available. Check the selected product variant before choosing your power supply.
3. Can I connect the COB LED strip directly to 110V or 220V?
No. This is a low-voltage DC LED strip. Never connect it directly to AC mains power. Use the correct DC 12V or DC 24V LED power supply.
4. Does the LED strip include a power supply?
No. The package contains the COB LED strip only. The power supply must be purchased separately.
5. Does the strip include an LED controller or dimmer?
No. A controller or dimmer is not included. A compatible single-color PWM LED controller can be added separately.
6. Is this COB LED strip dimmable?
Yes. Brightness can be adjusted with a compatible single-color PWM dimmer or LED controller.
7. Is the strip waterproof?
No. The strip is rated IP30 and is intended for dry indoor environments.
8. Can I cut the COB LED strip to a shorter length?
Yes. The strip is cuttable. The cutting interval varies by width and voltage, so always cut only at the marked cutting position.
9. Can I use this strip for kitchen under-cabinet lighting?
Yes. It is suitable for dry indoor cabinet and under-cabinet installations when used with the correct low-voltage power supply.
10. Which color temperatures are available?
White-light choices include 2700K warm yellow, 3000K warm white, 4000K natural white and 6000K cold white.
11. Which decorative colors are available?
Decorative color options include golden yellow, red, green, blue, ice blue and pink.
12. What power supply wattage should I choose?
Calculate the strip wattage based on the selected version and total installed length. For additional operating margin, a power supply rated at approximately 1.5 times the theoretical strip load is recommended.
13. Can I connect this strip to a smart-home controller?
The strip itself has no built-in smart function. It can be used with a compatible single-color PWM smart controller that matches the strip voltage and load requirements.
14. Can I turn the strip on while it is still rolled on the reel?
Do not operate the strip for extended periods while it is tightly wound. Unroll it before normal operation so heat can dissipate properly.
15. What safety or certification information is provided?
The available product specifications confirm DC 12V or DC 24V operation and IP30 indoor use. Specific certification details are not listed in the available product information.
Complete Your Lighting Setup
Need power? Choose a matching DC 12V or DC 24V LED power supply according to your selected strip voltage.
Need brightness control? Add a compatible single-color PWM dimmer or LED controller.
Helpful Lighting Guides
How to Choose Between 3mm, 5mm, 8mm and 10mm COB LED Strips
12V vs 24V LED Strip Lights: Which Voltage Should You Choose?
How to Calculate the Correct LED Power Supply Wattage
COB vs SMD LED Strip Lights: Understanding the Difference
Build the Lighting Setup That Fits Your Space
Select your preferred strip width, voltage and light color above, then pair it with the correct power supply for a clean and flexible indoor lighting solution.
Choose Your Variant Above
