Shenzhen Cooleeon Electronics Co., Ltd.

MALIIGAZA 10m COB LED Strip Light 16ft 12V/24V, CRI>90, 8mm Cuttable Dimmable Indoor Light

$23.99 USD

In offerta Esaurito

Spese di spedizione calcolate al check-out.

Color Warm Yellow 2700K Warm White 3000K Natural White 4000K Cold White 6000K

Voltage DC 12V DC 24V

Length 10m/ 32.8ft

10m Continuous COB Lighting Without the Usual 5m Limitation

MALIIGAZA FOB-312 is a 10 meter single-color COB LED strip designed to deliver smooth, continuous indoor lighting with 312 LEDs per meter, CRI>90 color quality and uniform illumination without visible light dots.

Choose DC 12V or 24V and 2700K, 3000K, 4000K or 6000K to create comfortable lighting for cabinets, kitchens, bedrooms, background walls and DIY interior projects.

Important: LED Strip Only

Power supply and LED controller are NOT included. A matching DC power supply must be purchased separately.

12V strip requires a DC 12V power supply. 24V strip requires a DC 24V power supply. Never connect this LED strip directly to AC 110V or AC 220V mains electricity.

Smooth Light From One Continuous 10m COB Strip

Many low-voltage COB strips are supplied in shorter 5 meter sections. The MALIIGAZA FOB-312 is designed as a full 10 meter strip, making it easier to create long, clean lighting runs with consistent illumination.

High-density COB construction blends individual LED points into a soft line of light, giving furniture, ceilings, cabinets and decorative surfaces a more refined appearance.

MALIIGAZA 10m COB LED strip light with smooth continuous illumination 10 meter COB LED strip light available in DC 12V and 24V 312 LEDs per meter COB LED strip with uniform dot-free light CRI greater than 90 COB LED strip for high quality indoor lighting 8mm wide flexible COB LED strip for cabinet and decorative lighting Cuttable COB LED strip with quick connectors for DIY installation Dimmable 10m COB LED strip with strong adhesive backing 12V 24V low voltage COB LED strip for indoor ambient lighting

Why Choose This COB LED Strip?

10m Continuous Length

A long 10 meter strip helps simplify extended indoor lighting projects and reduces unnecessary joins.

312 LEDs Per Meter

Dense COB LEDs produce a smooth and continuous lighting effect with fewer visible bright spots or dark areas.

CRI>90

High color rendering helps furniture, surfaces and decorative finishes appear more natural under the light.

DC 12V or 24V

Choose the voltage that matches your lighting system and compatible DC power supply.

Cuttable and Flexible

Trim the strip at designated cutting points and route it around furniture or architectural details.

Dimmable

Use a compatible single-color LED dimmer or controller when adjustable brightness is required.

Uniform COB Light Without Visible LED Dots

The 312LED/m COB design places a high density of light sources across the strip, creating a softer and more continuous illuminated surface than conventional low-density LED tape.

This makes the strip especially suitable for visible installations where smooth light quality matters, including cabinets, shelves, background walls and decorative ambient lighting.

One 10m Strip for Longer Lighting Runs

FOB-312 is designed for a 10 meter continuous run, giving you more flexibility for long cabinets, room accents, background walls and other extended indoor installations.

Choose the correct voltage version before ordering and always pair it with a matching DC power supply with sufficient output capacity.

Four White Color Temperature Options

2700K Warm White Warm and relaxing light for bedrooms and cozy ambient spaces.

3000K Warm White Comfortable warm-white illumination for residential interiors.

4000K Natural White Balanced white light for kitchens, cabinets and practical task areas.

6000K Cool White Clean, bright white illumination for modern interior applications.

Cut, Connect and Customize Your Installation

The strip can be cut only at the marked cutting positions. The minimum cutting unit is approximately 19.2mm for the 12V version and 38.4mm for the 24V version.

Quick connectors are included to simplify reconnection after cutting, cable connection and compatible corner installations.

Flexible Strip With Adhesive Backing

The flexible 8mm strip can follow many straight and gently curved indoor surfaces. Strong adhesive backing helps simplify installation on clean, dry and smooth mounting surfaces.

For demanding installations, long-term adhesion can be improved by using a suitable LED aluminum profile or additional mounting accessories.

Compatible With Optional Dimming Control

This is a single-color bare COB LED strip and does not include a controller.

Brightness adjustment can be added by pairing the strip with a suitable single-color DC LED dimmer or controller that matches the strip voltage and electrical load. Specific smart-home ecosystems are not included with the strip itself.

Ideal for Indoor Decorative Lighting

Kitchen Cabinets Smooth under-cabinet or cabinet accent lighting.

Bedrooms Create soft ambient lighting around furniture and walls.

Background Walls Add indirect illumination behind decorative surfaces.

Shelves and Displays Highlight objects and interior details with continuous light.

DIY Lighting Cut and configure the strip for customized indoor projects.

Interior Decoration Suitable for modern residential decorative lighting.

Technical Specifications

Brand	MALIIGAZA
Model	FOB-312
Product Type	Single-color COB LED strip
Length	10m
Strip Width	8mm
Working Voltage	DC 12V / DC 24V
Power	8W/m
LED Density	312 LEDs/m
Color Rendering Index	CRI / Ra >90
Luminous Efficiency	>100 lm/W
Color Temperature	2700K / 3000K / 4000K / 6000K
Minimum Cut Length	12V: 19.2mm / 24V: 38.4mm
Waterproof Rating	IP30
Recommended Use	Indoor decorative lighting

How to Choose the Power Supply

The complete 10m strip is rated at approximately 8W per meter, giving a theoretical strip load of approximately 80W.

For additional operating margin, a power supply rated at approximately 1.5 times the theoretical strip wattage is recommended.

Always match voltage exactly: use DC 12V for the 12V strip and DC 24V for the 24V strip.

Package Includes

1 x 10m MALIIGAZA FOB-312 COB LED strip
Quick connection accessories for compatible strip connections
Power supply NOT included
LED controller / dimmer NOT included

Installation Guide

1. Confirm the voltage.

Check whether your strip is the 12V or 24V version and select the matching DC power supply.

2. Fully unroll the LED strip.

Do not operate the strip while it remains tightly wound on the reel.

3. Measure and cut if necessary.

Cut only at the marked cutting positions. Do not cut through other sections of the circuit.

4. Connect the strip.

Use the supplied wire connection or compatible quick connectors while maintaining correct polarity.

5. Test before permanent mounting.

Confirm correct lighting operation before removing the adhesive backing.

6. Install on a clean surface.

Apply the strip to a clean, dry and smooth indoor mounting surface.

Troubleshooting Guide

The LED strip does not turn on

Check the power supply voltage, output capacity, connection polarity and all connector contact points.

The strip flickers

Check for loose connectors, unstable power output, insufficient power supply capacity or incompatible dimming equipment.

A section does not light after cutting

Confirm that the strip was cut at the designated mark and that the connector contacts align correctly with the strip pads.

The strip becomes unusually hot

Switch off the power and check that the strip is fully unrolled, properly ventilated and connected to the correct voltage supply.

Important Notes and Safety Warnings

Never connect the LED strip directly to AC 110V or AC 220V mains electricity.
Use only a compatible DC 12V power supply with a 12V strip.
Use only a compatible DC 24V power supply with a 24V strip.
The power supply is not included and must be purchased separately.
The LED controller or dimmer is not included.
Do not illuminate the strip while it is tightly wound on the reel because trapped heat may damage the LEDs.
IP30 construction is intended for dry indoor environments.
Disconnect electrical power before cutting, connecting or adjusting the strip.

COB LED strip producing soft uniform light without visible LED dots 10m COB LED strip for bedroom background wall and interior decoration Flexible COB LED tape for kitchen cabinet and shelf lighting High density 312LED per meter COB strip with continuous light output Warm white and natural white COB LED strip for indoor decoration 2700K 3000K 4000K and 6000K COB LED strip color options COB LED strip with quick connector for cut and reconnect installation 8mm COB LED strip with adhesive backing for easy indoor mounting MALIIGAZA FOB-312 10m low voltage COB LED strip light Indoor IP30 COB LED strip for kitchen bedroom cabinet and DIY lighting

Frequently Asked Questions

Does this 10m COB LED strip include a power supply?

No. This product is the COB LED strip only. The power supply must be purchased separately.

Does the COB LED strip include a controller or dimmer?

No. A controller or dimmer is not included. You can add a compatible single-color DC LED controller if brightness adjustment is required.

Can I connect this LED strip directly to 110V or 220V?

No. Direct mains connection will damage the strip. It must be powered through the correct DC 12V or DC 24V power supply.

What power supply do I need for a 10m COB LED strip?

The strip is rated at 8W/m, or approximately 80W for 10m. A power supply with additional capacity is recommended, with approximately 1.5 times the theoretical load preferred.

Can the 12V and 24V versions use the same power supply?

No. A 12V strip must use DC 12V, while a 24V strip must use DC 24V. Always match the power supply voltage to the strip.

Can this COB LED strip be dimmed?

Yes. The strip can be dimmed when used with a suitable single-color LED dimmer or controller that matches the operating voltage and electrical load.

Can I cut the COB LED strip?

Yes. Cut only at the marked cutting positions. The minimum cut unit is approximately 19.2mm for 12V and 38.4mm for 24V.

Can I reconnect the strip after cutting it?

Yes. Compatible quick connectors can be used to reconnect cut sections, connect wires or create compatible corner layouts.

Is the 10m COB LED strip waterproof?

No. The strip is rated IP30 and is intended for dry indoor environments.

Can this COB LED strip be installed outdoors?

No. The IP30 strip is intended for indoor use and should not be exposed to rain, water or outdoor weather conditions.

Does the COB strip show individual LED dots?

The high-density 312LED/m COB construction is designed to create a smooth, uniform line of light with minimal visible light spots.

What color temperatures are available?

The available single-color options are 2700K warm white, 3000K warm white, 4000K natural white and 6000K cool white.

What does CRI>90 mean for LED strip lighting?

CRI>90 indicates high color rendering performance, helping illuminated objects and interior finishes appear more natural.

Why should I not turn the LED strip on while it is rolled up?

A tightly rolled strip cannot release heat efficiently. Fully unroll the strip before powering it to reduce the risk of heat damage.

Can I use this strip with a smart home LED controller?

The strip itself has no built-in smart function. It may be paired with a suitable single-color smart LED controller that matches its voltage and electrical load.

What is the rated lifespan of this COB LED strip?

A specific rated lifespan is not stated for this model. Correct voltage, adequate power capacity and proper heat management help support reliable operation.

What certifications does the FOB-312 LED strip have?

Specific certification information is not stated in the available product specifications. Check the applicable product documentation when certification information is required for your installation.

Build a Cleaner, Smoother Line of Light

Choose the voltage and white color temperature that fits your project, then pair your 10m MALIIGAZA COB strip with a matching DC power supply for a flexible indoor lighting solution.

Select Your 12V or 24V Version