STEP-09 vs STEP-P5 vs STEP-07: Which MALIIGAZA Stair-Light Kit Fits Your Home?

MALIIGAZA’s three flagship stair-light kits—STEP-09, STEP-P5, and STEP-07—all create a sequential, step-by-step lighting effect with COB stair-light strips. But they are not three versions of the same purchase.

Choose STEP-09 when step count and a streamlined main-line route matter most. Choose STEP-P5 when Bluetooth App control and the ability to keep only chosen steps on are worth more cable planning. Choose STEP-07 when you value a highly stable, plug-in individual-step setup with a dedicated always-on mode and wireless wall control. The best choice starts with the actual staircase, not the most impressive feature list.

Quick answer: which MALIIGAZA stair-light kit should you choose?

• Choose STEP-09 when you need a serviceable main-line layout and as many as 28 illuminated steps.
• Choose STEP-P5 when Bluetooth App control, timer settings and individual-step control matter most; daylight sensing is not confirmed.
• Choose STEP-07 when you want a wireless wall switch, confirmed daylight sensing and a dedicated always-on mode for up to 20 steps.

First: these are complete stair-light kits, not controller-only comparisons

The controller changes how the system behaves, but the strip and connection layout change how the project is planned. All three kits use conventional fixed-white COB stair-light strips for a continuous, dot-free line of light. That uniform appearance comes from COB itself; MALIIGAZA stair-light kits do not include an aluminium profile, and a profile is not required to achieve an even COB light line.

The important difference is how each strip reaches the system:

• STEP-09: each strip has an approximately 20 cm lead that plugs directly into a main-line node. There is no separate extension lead to assign to each tread.
• STEP-07: each strip has an approximately 30 cm Dupont head, then uses the supplied 1–6 m Dupont-headed extensions where the route needs them. The connection is plug-in.
• STEP-P5: each strip already has an extension lead in a 1–5 m length range, then uses screw-down controller terminations. That makes the cable-length plan part of the selection decision, not a detail to leave until the end.

None of those layouts is universally “better.” They solve different homeowner problems.

STEP-09: the best starting point for a longer staircase and a clean main-line plan

STEP-09 is MALIIGAZA’s primary stair-light kit and the widest current step-count option among these three: 5–28 steps. It is a strong fit when the stair has many treads, you want sequential COB lighting with remote control and daylight sensing, and a main-line route can remain accessible for future inspection.

Its practical advantage is clarity. The approximately 20 cm strip lead plugs to the nearby main-line node, so you do not need to allocate a separate extension cable to every tread. For a straightforward flight, that can make the layout easier to organize before finishes close around it.

The important limitation is service access. STEP-09’s main line contains the per-step IC modules. A module can fail, although it can be replaced individually. That only remains an advantage if the main line and nodes can still be reached. Do not plan to seal that route into a wall, closed trim, or another non-openable area just because it looks neat; a failed module would then be much harder to replace.

STEP-09 advantages

• Current selector range up to 28 steps—the broadest of these three.
• Main-line structure with direct strip-to-node connection; no separate extension selection for every step.
• Remote control and daylight sensing are documented on the current product record.
• Fixed 3000K, 4000K, and 6000K choices allow a warm, neutral, or cool-white direction.

STEP-09 limits to accept before ordering

• No Bluetooth App control.
• No dedicated always-on mode is currently documented.
• Its main-line nodes need a real, serviceable route; hiding them permanently can turn a replaceable component into disruptive repair work.

STEP-07: the best fit for plug-in individual-step routing, wall control, and a dedicated always-on mode

STEP-07 is for a homeowner whose priorities are 5–20 steps, a dedicated always-on option, daylight sensing, and a wireless wall switch—not phone-App control. Its individual-step route does demand a cable plan, but the system is designed around a simple plug-in logic: each strip’s roughly 30 cm Dupont head joins the appropriate supplied 1–6 m extension.

That is a meaningful distinction from a generic “individual wiring is hard” story. You still need to document the route, label steps, and follow the current instructions, but the extension connection itself is plug-in rather than a bare-wire improvisation. The product team also confirms very high stability when STEP-07 is installed correctly. That is a reliability advantage, not a zero-failure promise.

STEP-07 advantages

• Dedicated always-on mode for households that sometimes prefer a steady stair-light state.
• Wireless wall switch plus daylight sensing; a good fit for people who prefer a physical control point instead of an App.
• Complete Dupont-wire connection set and plug-in extensions in a 1–6 m range.
• High stability in correctly installed use.
• Current fixed-white choices include 3000K, 4000K, and 6000K.

STEP-07 limits to accept before ordering

• Maximum current configuration is 20 steps, not 28.
• No Bluetooth App control.
• The extension route still has to be planned and matched to each step; “plug-in” does not mean “plan-free.”

STEP-P5: the best fit for App control and selected-step lighting—if you plan the cable order first

STEP-P5 is the most control-led choice of the three. It currently covers 5–16 steps and combines a Bluetooth App, RF remote, timer functions, and App-programmable always-on behavior. Its distinctive capability is individual step on/off: for example, a homeowner can choose to keep only the two lower steps and two upper steps lit rather than illuminate the complete flight.

That flexibility comes with a more deliberate planning requirement. Each STEP-P5 strip already carries a 1–5 m extension lead, and those leads connect to the controller with screw-down terminations. Before installation, map each step number and assign the appropriate lead length. Do not install them in a random order and hope the lengths work later.

The product team confirms very high stability after correct installation. Again, that means a robust, correctly planned system—not an absolute claim that no component can ever need attention. The current product records contain an unresolved daylight-sensor conflict, so this article does not count a daylight sensor as a STEP-P5 feature.

STEP-P5 advantages

• Bluetooth App, RF remote, timer functions, and App-programmable always-on behavior.
• Individual step on/off for selective use cases, such as only the top and bottom two steps.
• High stability in correctly installed use.
• Current fixed-white selector options: 3000K and 6000K.

STEP-P5 limits to accept before ordering

• Maximum current configuration is 16 steps.
• The pre-attached 1–5 m lead lengths must be assigned to the correct steps before fitting.
• The controller-side connection is screw-down, so it is less “plug-and-go” than STEP-07’s Dupont extension approach.
• Do not purchase it on the assumption of daylight sensing until that feature is confirmed for the exact current variant.

Detailed comparison: STEP-09 vs STEP-P5 vs STEP-07

Current-selector note: step ranges and color choices above were reviewed against current MALIIGAZA product records on 2026-08-23. Reconfirm the exact variant and current instructions immediately before ordering; product availability and option naming can change.

Color: choose the fixed-white variant for the staircase, not a screenshot

STEP-09 and STEP-07 currently give you 3000K, 4000K, or 6000K. STEP-P5 currently lists 3000K or 6000K. In broad visual terms, 3000K is warm white, 4000K is more neutral, and 6000K is cool white. Kelvin is not a brightness score and it cannot guarantee how your wood, stone, paint, or adjacent lighting will look in person.

Use the actual stair finish, nearby lighting, and the time of day the staircase is used to make the last decision. COB helps create a smooth, continuous-looking line without visible LED dots; it does not mean every color temperature will suit every interior.

Which kit should you choose?

Use this order of questions:

1. Count the full lit route first. If you need 21–28 steps, STEP-09 is the relevant option from this three-kit comparison. Do not count only the straight middle of the flight; include the intended first and last treads, turns, and landings where applicable.
2. Choose the control behavior before comparing cable layouts. STEP-P5 is for App, timer, and selected-step control. STEP-07 is for dedicated always-on behavior and a wireless wall switch. STEP-09 is for remote control and daylight sensing without an App.
3. Draw the service/cable plan before deciding that one system is “easier.” STEP-09 avoids separate extension selection per step but its main line must remain serviceable. STEP-07 is plug-in but still needs an extension map. STEP-P5 rewards careful cable assignment with the most granular step control.
4. Use the COB strip as a visual benefit, not a reason to skip planning. All three support the smooth, dot-free COB look. None of these kits includes an aluminium profile, and one is not needed for a uniform COB light line.

For an existing finished stair, begin with the project-planning guide before altering finishes or closing any route. Fixed electrical work, new outlets, concealed supply work, and local electrical requirements should be reviewed by a qualified local electrician.

Frequently asked questions

Can I use STEP-09 if I plan to hide all of the main line behind a finished wall?

That is not the preferred plan. STEP-09’s per-step IC modules can be replaced individually, but only if the main line and nodes can be accessed. Preserve a service path instead of sealing it into an unopenable wall or finish.

Does STEP-P5 let me leave only a few steps on?

Yes. STEP-P5 supports individual step on/off, so a project can intentionally keep selected steps lit—such as two at the bottom and two at the top. Map the strip lead lengths to those physical steps before installation.

Is STEP-07 easier to install than STEP-P5?

They simplify different parts of the project. STEP-07 uses supplied plug-in Dupont extensions, while STEP-P5 uses strip-mounted 1–5 m leads and screw-down controller terminations. STEP-07 is generally the simpler connection style; STEP-P5 offers more granular App-led behavior once its cable-length plan is correct.

Do I need an aluminium profile for the COB strips in these kits?

No. MALIIGAZA stair-light kits do not include aluminium profiles, and the COB strips themselves create a continuous, dot-free, visually uniform light line. Any optional finish treatment should be chosen for the specific staircase—not presented as a basic requirement of the kit.

Last reviewed: August 23, 2026. This guide reflects current listed configurations. Reconfirm the exact selected variant, package contents and latest instructions before ordering.

Final recommendation and product links

There is no winner for every home. Pick STEP-09 for the broadest step capacity and a serviceable main-line layout; STEP-P5 for Bluetooth App control and selected-step lighting when you can map every lead first; or STEP-07 for dedicated always-on use, wall control, and a plug-in individual-step route. Then verify the current selected variant against the exact staircase before placing the order.

• Shop STEP-09
• Shop STEP-P5
• Shop STEP-07