Shenzhen Cooleeon Electronics Co., Ltd.
3mm Ultra-Thin WS2812B Addressable COB LED Strip 5V RGB Individual Pixel Control 240LEDs/m High Bright USB Powered Light Tape
3mm Ultra-Thin WS2812B Addressable COB LED Strip 5V RGB Individual Pixel Control 240LEDs/m High Bright USB Powered Light Tape
Impossible de charger la disponibilité du service de retrait
Is this the right 3mm addressable COB strip for your project?
Direct answer: Choose this MALIIGAZA strip when you need an ultra-narrow 3mm-wide, DC 5V, WS2812B RGB COB strip with 240 individually addressable pixels per meter. It is designed for compact indoor accent-lighting projects where ordinary 8–12mm strips are too wide. Select 1m or 2m, then choose a controller kit or strip-only option that matches your installation.
Choose another product if you need 12V/24V operation, long continuous runs, fixed white task lighting, or outdoor waterproof protection.
Quick specification and buying check
| Strip | 3mm PCB · DC 5V · WS2812B · RGB · 240 LEDs/pixels per meter |
|---|---|
| Lengths | 1m (240 pixels) or 2m (480 pixels) |
| Control choices | SP548E WiFi kit, Tuya WiFi kit, strip only, or the listed extension-cable option. Read the complete selected variant name before checkout. |
| Minimum power guidance | 1m: 5V 2A or higher · 2m: 5V 3A or higher |
| Signal connection | 3-pin addressable connection; controller must support WS2812B-type SPI RGB data and the required pixel count. |
Ultra-Thin. Fully Addressable. Built for Creative Lighting.
The MALIIGAZA 3mm Addressable COB LED Strip combines an ultra-narrow 3mm PCB with 240 individually controllable WS2812B pixels per meter. Its continuous COB light surface delivers smooth RGB lighting with minimal visible light spots, making it ideal for compact spaces, custom installations, gaming setups, TV backlighting, PC lighting, cabinets and vehicle interior ambient lighting.
Why Choose This 3mm Addressable COB Strip?
Ultra-slim design fits narrow channels, edges, furniture gaps and compact DIY projects.
Each LED has integrated WS2812B control for single-pixel addressable RGB effects.
High-density COB construction creates a continuous and uniform illuminated surface with fewer visible light spots.
Create flowing, chasing, animated and static RGB lighting effects through a compatible SPI RGB controller.
Individually Addressable WS2812B Pixels
This is not a conventional RGB strip where the entire strip changes color together.
The integrated WS2812B architecture provides individual pixel control, allowing each LED position to display independently controlled colors and effects when used with a compatible SPI controller.
240 LEDs + 240 ICs Per Meter
Every meter contains 240 LEDs and 240 integrated control ICs. This extremely high pixel density makes the strip especially suitable for detailed lighting animations and compact decorative projects.
Ultra-Fine 3mm Design
At only 3mm wide, this addressable COB LED tape is designed for lighting locations where conventional 8mm, 10mm or 12mm LED strips are too wide.
The narrow flexible PCB can follow different shapes and allows creative lighting installations with minimal visual impact when the strip is turned off.
High-Density COB Light Surface
With 240 LEDs per meter, the COB structure produces smooth, uniform RGB illumination with greatly reduced visible light spots and dark areas compared with many traditional discrete SMD LED strips.
CRI is rated above 90, while the flexible design makes the strip practical for decorative and detail-oriented lighting applications.
Flexible, Cuttable and Easy to Install
The strip can be bent into different layouts and cut to shorter lengths at the designated cutting positions.
Strong adhesive backing allows the strip to be mounted directly onto suitable clean and smooth surfaces.
Only cut the strip at the designated cutting lines. The cutting marks are very small because the PCB is only 3mm wide. If the marks are difficult to see from the front, carefully inspect the rear side under the adhesive backing.
Smart Controller Options
Different controller configurations are available depending on the selected option.
- Bluetooth controller options available
- WiFi controller options available
- Remote control options available
- WiFi controller supports Alexa and Google Assistant voice control
- Compatible smart controller can provide app-based RGB color and dynamic effect control
Perfect for Creative Ambient Lighting
Why Maximum Length Is Limited to 2 Meters
The extremely narrow 3mm PCB combined with 240 addressable pixels per meter creates relatively high current demand.
For this reason, this model is offered in lengths up to 2 meters. Longer runs can experience voltage drop and may exceed the pixel or current capacity of many common controllers.
Your SPI controller must support at least 240 pixels for a 1m strip or 480 pixels for a 2m strip.
Technical Specifications
| Model | FOB-HC-3MM |
| Product Type | Addressable COB RGB LED Strip |
| Available Length | 1m / 2m |
| Strip Width | 3mm |
| Working Voltage | DC 5V only |
| LED Density | 240 LEDs/m |
| IC Model | WS2812B |
| IC Density | 240 ICs/m |
| Pixel Control | Individual pixel control |
| Power | 15W/m |
| CRI | Ra >90 |
| Minimum Cutting Unit | 50mm |
Package Includes
Package contents depend on the option selected when ordering. Please check the selected variant carefully before purchase to confirm whether your configuration includes a controller or remote control.
Basic Installation Guide
- Measure the required installation length.
- If shortening is required, cut only at the designated cutting position.
- Connect the LED strip to a compatible SPI RGB controller.
- Set the controller pixel quantity correctly: 240 pixels for 1m or 480 pixels for 2m.
- Connect the system to a suitable DC 5V power supply.
- Test the complete system before final mounting.
- Clean the installation surface and secure the strip using its adhesive backing.
Important Power and Safety Notes
- DC 5V ONLY. Never connect this strip to a 12V or 24V power supply.
- For 1m, use a DC 5V power supply rated at least 2A according to the specified product requirement.
- For 2m, use a DC 5V power supply rated at least 3A according to the specified product requirement.
- The controller and power supply must be able to provide sufficient current for the selected strip length.
- Use only an SPI RGB controller with sufficient pixel capacity.
- Do not power the LED strip while it is tightly rolled on a reel. Heat may accumulate and damage the strip.
- Cut only at designated cutting marks.
Troubleshooting Guide
Only Part of the Strip Lights Up
Check the pixel quantity configured in the controller. Set 240 pixels for a 1m strip and 480 pixels for a 2m strip.
The Strip Lights Up but Then Freezes
Insufficient power supply capacity is a likely cause. Check that the power supply can provide enough current, then reset the controller, remote or app as required.
Displayed Colors Do Not Match the Selected Colors
If selecting red produces green or another incorrect color, adjust the RGB color order setting in the compatible controller or app.
Controller Difference
Frequently Asked Questions
1. Is this a individually addressable LED strip?
Yes. It uses integrated WS2812B ICs with 240 individually controllable pixels per meter.
2. How wide is the LED strip?
The PCB is only 3mm wide, making it suitable for very narrow installation spaces.
3. What voltage does this WS2812B COB strip require?
It operates on DC 5V only. Do not connect it to a 12V or 24V power supply.
4. How many pixels should I set in my controller?
Set 240 pixels for the 1m version and 480 pixels for the 2m version.
5. Can I cut the 3mm addressable COB LED strip?
Yes. The minimum cutting unit is 50mm. Cut only at the designated cutting marks.
6. What controller do I need?
You need a compatible SPI RGB controller that supports WS2812B-type addressable LEDs and has sufficient pixel capacity.
7. Does it support WiFi or Bluetooth control?
WiFi and Bluetooth controller options are available depending on the selected configuration.
8. Can it work with Alexa and Google Assistant?
A compatible WiFi controller option supports Alexa and Google Assistant voice control.
9. Why is the maximum strip length only 2 meters?
The 3mm PCB and very high density of 240 pixels per meter create high current demand. Longer lengths are more susceptible to voltage drop and controller capacity limitations.
10. Is this LED strip waterproof?
No IP or waterproof rating is specified for this model. Do not assume the strip is waterproof unless the selected product option specifically states otherwise.
11. Why does only part of my strip light up?
The controller pixel setting may be too low. Check that it is configured for 240 pixels for 1m or 480 pixels for 2m.
12. Why does the controller or app freeze after the strip turns on?
Insufficient power supply output may cause unstable operation. Check the available current and reset the controller or app after correcting the power supply issue.
13. Why are the RGB colors displayed incorrectly?
The RGB color order setting may not match the strip. Change the RGB sequence in the compatible controller or app.
14. Can I turn the strip on while it is still rolled up?
No. Do not operate the strip while tightly rolled on a reel because accumulated heat can damage the LEDs.
15. Where can I use this ultra-thin LED strip?
Typical applications include TV backlighting, PC and gaming lighting, desktops, cabinets, bedrooms, vehicle interiors and custom DIY decorative lighting.
16. What is the rated LED lifespan?
A specific lifespan rating is not provided for this model. Correct voltage, sufficient power capacity and proper heat management are important for reliable operation.
17. What safety certifications does this model have?
Specific certification information is not provided in this product specification. Check the applicable product documentation or labeling for your selected version.
Bring Pixel-Level RGB Lighting Into Smaller Spaces
Choose the 1m or 2m configuration that fits your project and create smooth, programmable lighting with an ultra-narrow 3mm addressable COB strip.
Related Product Suggestions
- SPI RGB LED Controllers
- WiFi Addressable LED Controllers
- Bluetooth Addressable LED Controllers
- 5V LED Power Supplies
- Addressable COB LED Strips
- COB LED Strip Accessories
Related Blog Suggestions
- How to Choose a Controller for WS2812B Addressable LED Strips
- Addressable LED Strip vs Regular RGB LED Strip
- How to Calculate Pixel Count for an SPI LED Controller
- How to Install Ultra-Narrow COB LED Strips
- Why Voltage Drop Matters in 5V Addressable LED Strips
excellent product
Nice and small neo pixel strip. Comes coated in a sicone cover which acts a a difuser. There size opens up a whole wider range of applications. Neat...
These led strips get so hot that a heatpipe or a copper strip should be attached to the back of it if it's being used in free floating form.
13 coins await. Add more for up to 20 coins.
Sent quickly and arrived in good condition, well packaged and bright these leds are awesome for dressing up your quad
Very happy works well fast postage great size what i need for. great bang for buck to.
very good product
works perfectly
THANK YOU
Super LED Light Show
works perfectly
Even I, as a beginner, managed to do it.
Thank you
Fantastic bright strip, super thin, cuttable every 4cm or so. highly recommend
Works perfectly with the esp32 project.
Perfect 👌
Very well.
Perfect 🙃
Magnificent. As described. Fast shipping. Good seller.
Very very fine and very good lighting, it's amazing.
Utterly incredible lights. You can program each individual led along the strip to be any colour, to flash, pulse, even get sequences of chasing lights in segments, having some leds of or on, perfect for lighting models or for any project. Easy to use app, very bright, very controllable, just be sure to work out which colour or action each led should be before you put it in so you don’t accidentally delete your theme. Can’t recommend it highly enough! Price is excellent and functionality is supreme!
Super tiny leds.
Good!