Shenzhen Cooleeon Electronics Co., Ltd.
MALIIGAZA STEP-C32 Smart Motion Sensor Stair Lighting Kit - Customizable COB LED Step Light System (Up to 32 Steps)
MALIIGAZA STEP-C32 Smart Motion Sensor Stair Lighting Kit - Customizable COB LED Step Light System (Up to 32 Steps)
No se pudo cargar la disponibilidad de retiro
Transform your staircase into a modern, safe, and automated architectural showcase with the MALIIGAZA STEP-C32 Motion Sensor Stair Lighting Kit.
Featuring ultra-bright, continuous 24V COB LED strips, dual PIR motion activation, and a fully modular plug-and-play design engineered for up to 32 individual steps.
Step Into Elegance & Safety Every Single Night
Navigating dark staircases at night shouldn't mean fumbling for wall switches or risking slips and falls. Traditional staircase lighting often requires expensive built-in electrical recessed fixtures or produces harsh, uneven glare.
The MALIIGAZA STEP-C32 Smart Motion Sensor Stair Lighting System delivers seamless, progressive illumination that welcomes every footstep. Utilizing seamless COB (Chip-on-Board) LED technology, this customizable DIY kit automatically cascades light step by step as you approach, creating a high-end luxury aesthetic at a fraction of custom installation costs.
Why Choose the MALIIGAZA STEP-C32 System?
- Customizable Modular Build: Pick exact quantities of COB strips, power supply, and extension cables tailored specifically to your staircase layout.
- Hands-Free Motion Activation: Dual high-sensitivity PIR sensors detect movement at the top and bottom of your stairwell instantly.
- Dotless COB Illumination: Enjoy immaculate 480 LEDs/m linear lighting without dark spots, visible diodes, or grainy pixelation.
- Plug-and-Play Dupont Connectivity: Secure Dupont standard connectors ensure rapid, mistake-free DIY installation without complex soldering.
- High Color Fidelity (CRI 90+): True-to-life color rendering highlights natural wood, carpet, tile, or marble stair treads beautifully.
Key System Features
1. Fully Modular & Budget-Friendly Customization
No two staircases are identical. MALIIGAZA gives you maximum financial and design flexibility by offering the 32-step controller, 1m COB LED strips, Dupont extension cords (3m or 5m), and power supplies as individual modular options. Order exactly what your project demands without paying for leftover components.
2. Dual PIR Motion Detector Automation
Equipped with top and bottom precision PIR motion detectors. Light triggers automatically when body heat/motion is registered from either direction. Designed without daylight sensors, the STEP-C32 guarantees dependable trigger performance in low-light corridors or fully enclosed stairwells whenever footsteps approach.
3. Dynamic Cascading Sequence & Speed Control
Personalize your staircase movement. Choose between step-by-step progressive sequential flow or multi-step group illumination. Adjust the cascading speed to match your comfortable walking pace, and dial in the delay timer for how long lights remain illuminated before gracefully powering down.
4. Premium 24V COB LED Light Strips (480 LEDs/m)
Engineered with dense 480 chips per meter, generating up to 1100 Lumens/m of smooth light. Backed by heavy-duty self-adhesive backing tape, each 1-meter strip can be cut cleanly every 50mm to match exact step widths. Available in Warm White (3000K), Natural White (4000K), or Cool White (6000K).
Smart Home & Safety Integration
While functioning autonomously via dual hardware PIR motion sensors, the MALIIGAZA STEP-C32 system can be integrated into smart home setups by connecting its DC power supply to a smart plug or home automation switch (such as Tuya, Zigbee, or SmartThings enabled outlets).
This provides peace of mind for households with children, elderly family members, or late-night night owls seeking effortless, automatic illumination.
Versatile Indoor Application Scenarios
- Residential Staircases: Main entryway stairs, basement access steps, and second-floor duplex hallways.
- Commercial Venues: Boutique hotel stairwells, modern lounge steps, studio lofts, and showroom pathways.
- Custom Architectural Accents: Under-step overhang lip lighting, side-skirt riser channels, and handrail recessed channels.
Technical Specifications
| Model | MALIIGAZA STEP-C32 |
|---|---|
| Max Step Support | 1 to 32 steps (adjustable) |
| LED Technology | High-Density COB (Chip-on-Board) |
| LED Density | 480 LEDs per meter |
| Operating Voltage | DC 24V |
| Power Consumption | 10W per meter |
| Color Rendering Index | CRI 90+ |
| Luminous Output | 1000 - 1100 Lumens/meter |
| COB Strip Dimensions | 1000mm (L) x 8mm (W) x 2.2-2.5mm (H) |
| Cuttable Interval | Every 50mm along cut line markings |
| Waterproof Rating | IP30 (Indoor Non-Waterproof) |
| Sensor Type | Dual PIR Motion Detectors |
| Connector Standard | Pre-soldered Dupont Quick-Connectors |
| Color Temperatures | Warm White (3000K) / Natural White (4000K) / Cool White (6000K) |
Package Contents (Modular Selection)
Note: This product uses a modular selection menu. Customize your kit by selecting your exact required quantities from the dropdown menu above:
- 1x MALIIGAZA STEP-C32 Smart Motion Controller with 2x PIR Motion Sensors
- 1m 24V COB LED Light Strips with pre-attached Dupont connectors (Quantity chosen by customer)
- 3m or 5m Dupont Extension Cable Harnesses (Quantity chosen by customer)
- 24V DC Power Supply Transformer (Chosen according to total wattage requirements)
Step-by-Step DIY Installation Guide
- Surface Preparation: Thoroughly clean each stair step tread or riser surface with isopropyl alcohol. Ensure surfaces are 100% dry, flat, and dust-free before applying tape.
- Mounting COB LED Strips: Measure step widths. If needed, cut the 1-meter COB strips along the designated 50mm copper cut lines. Peel the backing off the high-tack adhesive tape and press firmly along the underside of step lips or risers.
- Running Wire Extensions: Plug the Dupont quick-connector from each LED strip into a 3m or 5m Dupont extension cable and route wires discreetly along stair skirts or channel molding.
- Connecting to Controller: Plug each step wire harness sequentially into port numbers 1 through N on the STEP-C32 controller terminal block starting from the bottom step upward.
- Positioning Motion Sensors: Install the top PIR sensor near the top stair riser and the bottom PIR sensor near the lowest stair step riser facing walking direction.
- Power Connection: Connect the STEP-C32 controller output terminal to the 24V DC power transformer. Plug the transformer into your mains wall outlet to initialize mode settings.
Quick Troubleshooting Guide
Verify that the 24V DC transformer is powered on and wire polarity (+/-) matches between power supply and controller terminals. Check that Dupont connectors are plugged firmly into controller ports.
Ensure PIR sensors are positioned away from direct HVAC air vents, hot radiators, or reflective moving surfaces that produce rapid thermal changes.
Important Safety & Usage Notes
- NEVER connect directly to AC mains power: High voltage (AC 110V/220V) directly connected to the controller or LED strips will cause immediate, permanent destruction and fire hazard. ALWAYS route through an approved DC 24V transformer.
- Surface Cleanliness: Mounting tape requires a clean, non-greasy surface. Unfinished porous wood or textured wall surfaces may require additional mounting clips or profile channels.
- Double-Check Quantities: All components are ordered independently on this product listing. Please double-check step counts and wire distances before completing checkout.
Frequently Asked Questions
How does the motion sensor stair lighting kit trigger when someone walks by?
The system uses two PIR (Passive Infrared) motion sensors positioned at the top and bottom of the staircase. When a person steps into the sensing range, the STEP-C32 controller triggers the LED light strips to illuminate in sequence.
Can I adjust the speed of the step-by-step cascade animation?
Yes. The STEP-C32 controller features speed adjustment settings, allowing you to speed up or slow down the light sequence to perfectly match your natural walking pace.
Does this stair light controller work with fewer than 32 steps?
Absolutely. While the controller supports up to 32 steps, you can set the exact number of steps (e.g., 12, 14, or 16 steps) directly on the controller during setup.
Are the COB LED strips cuttable to fit narrower staircase widths?
Yes, each 1-meter COB LED strip features designated copper cut points every 50mm. You can trim the strip cleanly using household scissors to match your stair width.
Is the MALIIGAZA motion sensor stair lighting kit waterproof for outdoor stairs?
No, this kit features an IP30 rating and is specifically designed for indoor stairwells, indoor foyers, and covered interior staircases.
Do I need soldering skills to install these stair lights?
No soldering is required. The system utilizes plug-and-play Dupont quick-connectors on the LED strips, extension cables, and controller ports for simple tool-free installation.
What voltage does this stair light system run on?
The system runs on safe DC 24V low-voltage power. It must always be connected to a matching DC 24V power supply transformer before plugging into AC wall sockets.
Can I adjust the brightness of the COB LED stair lights?
Yes, the STEP-C32 controller includes multi-level brightness adjustment settings so you can set gentle ambient glow or bright full visibility.
How long do the stair light strips remain on after motion stops?
You can configure the delay timer on the controller to keep lights illuminated for your preferred duration after motion ceases before they turn off sequentially.
What is the advantage of COB LED strips over traditional SMD LED strips?
COB (Chip-on-Board) LEDs place 480 chips per meter under a continuous phosphor layer, producing seamless linear light with zero visible dark spots or spotty diode dots.
Which extension cable length should I choose for my stairs?
For steps closer to the controller location, 3-meter cables are typically sufficient. For steps further up long stair flights, 5-meter cables ensure comfortable routing without wire tension.
Does the PIR sensor work in complete darkness?
Yes. Passive Infrared (PIR) sensors detect thermal heat motion signatures rather than light, ensuring instantaneous triggering in total darkness.
What is the expected lifespan of MALIIGAZA COB LED light strips?
Our commercial-grade 24V COB LED strips have an estimated rated lifespan exceeding 50,000 hours under standard residential indoor operating conditions.
Can I connect smart home plugs to control system main power?
Yes, plugging the 24V transformer into a smart plug allows you to schedule operational hours or turn off system power when traveling.
Upgrade Your Home Safety & Aesthetics Today
Design your tailored MALIIGAZA smart stair lighting setup now. Select your required steps, COB strips, and extension cables above for a flawless, modern home lighting transformation.
