MALIIGAZA
MALIIGAZA SP328E SPI RGB LED Controller with Bluetooth MESH Group Sync, BanlanX App and 2.4G RF Remote Support (Copy)
MALIIGAZA SP328E SPI RGB LED Controller with Bluetooth MESH Group Sync, BanlanX App and 2.4G RF Remote Support (Copy)
No se pudo cargar la disponibilidad de retiro
SP328E Bluetooth MESH SPI RGB LED Controller
Build synchronized addressable RGB lighting across multiple zones with the MALIIGAZA SP328E. Designed for DC 5-24V SPI RGB LED strips, it combines BanlanX Bluetooth APP control, MESH networking, group control, rich dynamic effects, and optional 2.4G RF remote control in one compact system.
One Lighting System. Multiple Controllers. Synchronized Effects.
Creating synchronized addressable lighting across several rooms, cabinets, ceiling sections, display areas, or decorative zones can become complicated when every controller works independently.
SP328E is designed to simplify multi-controller installations through Bluetooth MESH networking. Multiple compatible controllers can be added in the BanlanX APP, organized into groups, controlled individually, or operated together for coordinated lighting effects.
Why Choose SP328E?
? MESH Group Synchronization
Link multiple compatible controllers for synchronized lighting control across larger installations.
? BanlanX Bluetooth APP
Add controllers to the APP, organize them into groups, or control individual controllers separately.
? Up to 900 Pixels
One controller supports up to 900 pixels for compatible SPI RGB addressable LED installations.
? DC 5V / 12V / 24V
Compatible with a wide range of low-voltage addressable RGB LED strip systems.
? Optional 2.4G RF Remote
Use the optional ultra-thin remote for convenient wireless control without opening the APP.
? Dynamic Effect Preview
The redesigned APP interface provides a selection of dynamic and static lighting modes with effect previews.
Bluetooth MESH Networking for Multi-Zone Lighting
SP328E is designed for installations where several addressable LED controllers need to operate together.
Keep neighboring controllers within a suitable communication distance, specified at up to approximately 30 meters between controllers, and the MESH network can continue through additional compatible controllers.
This makes the system suitable for larger decorative lighting projects where a single controller cannot conveniently serve every LED section.
BanlanX APP: Group or Individual Control
Connect the SP328E to the BanlanX APP through Bluetooth.
Multiple controllers can be added to the APP and organized into groups for unified operation. Controllers can also be selected individually when different lighting zones need independent control.
This provides a flexible control structure for DIY lighting, home decoration, display lighting, and multi-zone smart indoor lighting projects.
Optional 6-Channel MESH Remote Control
The optional 2.4G RF remote provides a convenient physical control option for users who do not want to use a phone every time.
- Supports up to 6 controller channels for individual controller selection.
- Can also operate synchronized controller groups.
- The remote can connect with the BanlanX APP through Bluetooth.
- Ultra-thin, minimalist design for modern smart lighting systems.
- Remote requires 1 x CR2025 battery.
Up to 900 Addressable Pixels Per Controller
Each SP328E controller supports up to 900 pixels, making it suitable for both compact accent lighting and larger addressable RGB installations.
Automatic IC or pixel quantity recognition helps simplify configuration so users do not need to manually enter the pixel quantity for every compatible installation.
Broad SPI RGB Strip Compatibility
SP328E is designed for DC 5V, 12V, and 24V SPI RGB addressable LED strips.
Listed compatible IC families include:
Always confirm the LED strip voltage, IC type, and wiring requirements before connecting it to the controller.
Rich Dynamic and Static Lighting Effects
The BanlanX APP provides a redesigned visual interface with multiple dynamic and static lighting modes.
Dynamic effect previews make it easier to browse lighting styles before applying them to your LED installation, helping users quickly change the atmosphere for entertainment spaces, decorative lighting, display areas, or everyday ambient lighting.
APP and Wireless Control Compatibility
APP: BanlanX
Phone Connection: Bluetooth
Networking: Bluetooth MESH
Optional Remote: 2.4G RF / MESH remote
Important: This controller does NOT use Tuya or Smart Life.
Ideal Applications
Build synchronized addressable lighting across multiple indoor zones.
Coordinate multiple independent SPI RGB strip sections.
Create dynamic pixel lighting around entertainment spaces.
Manage several decorative RGB lighting zones from one APP ecosystem.
Flexible control for custom addressable RGB LED installations.
Create coordinated smart indoor decorative lighting during remodeling projects.
Technical Specifications
| Brand | MALIIGAZA |
| Model | SP328E |
| Controller Type | SPI RGB Addressable LED Controller |
| Working Voltage | DC 5-24V |
| Maximum Current | 15A |
| Maximum Pixel Control | Up to 900 Pixels |
| APP | BanlanX |
| APP Connection | Bluetooth |
| Networking | Bluetooth MESH |
| Remote Control | Optional 2.4G RF MESH Remote |
| Remote Channels | Up to 6 Controllers for Individual Channel Control |
| Remote Battery | 1 x CR2025 |
| Controller Size | 118 x 45 x 15 mm |
| Remote Color | White |
| Supported Lighting | DC 5V / 12V / 24V SPI RGB LED Strips |
Package Options
Available configurations include:
- Controller only
- 1 Remote + 1 Controller
- 1 Remote + 2 Controllers
- 1 Remote + 3 Controllers
- 1 Remote + 4 Controllers
- 1 Remote + 5 Controllers
- 1 Remote + 6 Controllers
Please select the required configuration before ordering. The remote is optional and is not included with the controller-only option.
Basic Installation Guide
- Confirm LED compatibility: Verify that your LED strip is a compatible SPI RGB addressable strip.
- Check voltage: Confirm whether the strip requires DC 5V, 12V, or 24V.
- Select the correct DC power supply: The controller must be powered from a suitable DC 5-24V power source.
- Switch power off: Complete all controller and LED strip connections before applying power.
- Connect the LED strip: Match the controller connection markings with the wiring requirements of your LED strip.
- Apply DC power: Power the system only after confirming the voltage and connections.
- Install BanlanX: Open the BanlanX APP and use Bluetooth device discovery to add the controller.
- Create groups: Add additional SP328E controllers and organize them into groups when synchronized operation is required.
- Optional remote: Pair and configure the remote if your selected package includes one.
Troubleshooting Guide
BanlanX cannot find the controller
Confirm that the controller is receiving the correct DC 5-24V power and Bluetooth is enabled on the phone, then retry device discovery in BanlanX.
LED strip does not respond correctly
Verify that the strip is an SPI RGB addressable model supported by the controller and confirm that its working voltage matches the power supply and controller setup.
Multiple controllers are not synchronizing properly
Confirm that the controllers have been added to the same BanlanX MESH environment and grouped correctly. Reduce the spacing between neighboring controllers if necessary.
Remote does not control the expected controller
Check the remote channel assignment and confirm that the intended controller has been added to the correct channel or synchronized group.
Remote has no response
Confirm that the selected package includes the remote and verify that a suitable CR2025 battery is installed.
Important Notes and Safety Warnings
- DC 5-24V ONLY. Never connect the SP328E controller directly to AC 110V or AC 220V mains power.
- Direct connection to mains voltage can immediately damage the controller and create a serious electrical hazard.
- Use a suitable DC power supply that matches the working voltage of the connected LED strip.
- This controller uses the BanlanX APP and does not support Tuya or Smart Life.
- The RF remote is optional. Select a remote package if physical remote control is required.
- No waterproof or IP rating is specified for the controller in the supplied product information. Use it in a protected indoor installation unless separate verified waterproof protection is provided.
- No specific regulatory certifications are stated in the supplied product information. Do not assume certification status without checking the documentation for the exact version being purchased.
Frequently Asked Questions
1. What LED strips are compatible with the SP328E controller?
SP328E is designed for compatible DC 5V, 12V, and 24V SPI RGB addressable LED strips, including listed IC types such as WS2811, WS2812, WS2815, and SK618.
2. How many pixels can SP328E control?
One SP328E controller supports up to 900 addressable pixels.
3. Does SP328E automatically detect the LED pixel quantity?
The controller is designed with automatic IC or pixel quantity recognition to simplify compatible SPI strip configuration.
4. Which APP does the SP328E use?
The controller uses the BanlanX APP and connects to a smartphone through Bluetooth.
5. Does SP328E work with Tuya or Smart Life?
No. SP328E uses the BanlanX ecosystem and does not support Tuya or Smart Life.
6. Can multiple SP328E controllers synchronize together?
Yes. Compatible controllers can be connected through Bluetooth MESH networking and organized into groups for synchronized control.
7. What is the recommended distance between MESH controllers?
The supplied specification states a distance of up to approximately 30 meters between controllers under suitable conditions. For more reliable networking, keep neighboring controllers within an appropriate communication range.
8. Can I control each controller separately?
Yes. Controllers added to BanlanX can be controlled individually or organized into groups for unified control.
9. How many controllers can one remote control individually?
The optional remote provides up to 6 channels for individual control of up to 6 controllers and can also be used with synchronized controller groups.
10. Is the remote included with every SP328E controller?
No. The remote is optional. Select one of the remote-and-controller package variants if you require remote control.
11. What battery does the SP328E remote use?
The optional remote requires one CR2025 battery.
12. Can I connect the SP328E directly to AC 110V or 220V?
No. SP328E is a DC 5-24V controller. Never connect it directly to AC 110V or 220V. Use a suitable low-voltage DC power supply.
13. Is the SP328E waterproof?
No waterproof or IP rating is specified in the supplied product data. Install the controller in a dry, protected indoor location unless separate verified waterproof protection is used.
14. Can I cut or extend the LED strip used with SP328E?
Cutting and extension rules depend on the specific SPI LED strip, not the controller. Always follow the cut points, voltage requirements, and wiring instructions supplied with your LED strip.
15. Does SP328E include dynamic lighting effects?
Yes. BanlanX provides multiple dynamic and static lighting modes, together with a visual effect preview interface.
16. What determines the lifespan of the connected LED strip?
The SP328E does not define the rated lifespan of the connected LED strip. LED lifespan depends on the specific strip, power supply, operating conditions, and installation.
17. What certifications does the SP328E have?
No specific certification information is provided in the supplied product data. Check the documentation for the exact product version if certification is required for your project or market.
Build a Smarter Multi-Zone Addressable Lighting System
Choose the SP328E configuration that matches your project, from a single controller to a 6-controller package with remote, and create synchronized SPI RGB lighting through the BanlanX MESH ecosystem.
Choose Your SP328E ConfigurationRecommended for Your Lighting System
- Compatible DC 5V / 12V / 24V SPI RGB Addressable LED Strips
- DC LED Power Supplies Matched to Your Strip Voltage and Load
- SP328E Optional 2.4G RF MESH Remote Controller
- LED Strip Connectors and Extension Cables for Compatible SPI Installations
Helpful Guides
- SPI vs PWM LED Controllers: What Is the Difference?
- How Bluetooth MESH LED Controller Group Sync Works
- How to Choose a 5V, 12V, or 24V Power Supply for Addressable LED Strips
- WS2811 vs WS2812 vs WS2815 Addressable LED Strips
- How to Plan a Multi-Zone Addressable RGB LED Lighting System
Share
