Shenzhen Cooleeon Electronics Co., Ltd.
Smart Motion Sensor LED Stair Light Kit | Always-On Constant Mode & Dual Wireless Switches | High CRI 90+ Plug-and-Play 1m 1.2m COB LED Strip Staircase System
Smart Motion Sensor LED Stair Light Kit | Always-On Constant Mode & Dual Wireless Switches | High CRI 90+ Plug-and-Play 1m 1.2m COB LED Strip Staircase System
No se pudo cargar la disponibilidad de retiro
Welcome to the future of architectural home illumination. The MALIIGAZA Intelligent Motion Sensor Stair Light Kit redefines interior luxury by turning your staircase into a responsive, fluid wave of light. This premium system eliminates the clinical look of old-school spotted LEDs, replacing it with a flawless, continuous linear glow that elevates home safety and visual sophistication.
The Hybrid Advantage: Motion Sensing + Always-On Switch Mode
Standard motion-activated stair lights on the market have a major flaw: they only turn on when someone walks past. MALIIGAZA breaks this limitation with our exclusive dual-mode architecture.
Included in your kit are two RF wireless wall switches (one for downstairs, one for upstairs). With a single click, you can bypass the sensors and force the staircase into a beautiful, continuous Always-On Constant Mode?aperfect for evening hosting, holiday mood lighting, or a steady architectural accent. Click again to seamlessly return to smart automated sensing.
?? Note: The wireless wall switch mode and PIR motion sensor mode function independently to optimize performance and cannot run simultaneously.
Premium Engineering, Intelligent Control
? No More Ugly Dots: Ultra-Dense 480 LEDs/m COB Strips
Cheap competitor kits use outdated SMD bulbs or low-density strips (like 320 LEDs/m) that throw distracting, pixelated light dots onto your steps and walls. MALIIGAZA utilizes premium 24V COB LED strips packed with 480 chips per meter. The result is an unbroken, solid ribbon of light. Paired with a museum-grade color accuracy rating of CRI 90+, it brings out the rich, authentic tones of your wooden, stone, or carpeted stairs.
?? Smart Daylight Sensor for Maximum Eco-Efficiency
Why waste energy lighting up your staircase on a bright afternoon? Our integrated ambient daylight sensor monitors your space in real time. When natural sunlight is sufficient, it blocks the system from activating when you walk past. You can easily adjust the sensor's sensitivity or disable it entirely to match your specific home layout.
?? 12 Tailored Cascading Light Sequences
Take total command of the KLA-STEP-07 intelligent controller. Choose from 12 distinct dynamic tracking patterns, including elegant step-by-step cascading wave modes. You can finely adjust the dimming brightness parameters, calibrate the exact speed of the step lighting, and set an automated shutdown timer ranging from 10 to 120 seconds.
?? Real Plug-and-Play Dupont Connectivity
Forget complex electrical layouts or messy wire stripping. Every single connection profile?afrom the 1-meter lighting strips to the extensions and sensors?ais fitted with standard, secure Dupont connectors. They click straight into place like a puzzle piece, making this system incredibly simple and safe to install for any DIY enthusiast.
Custom Built for Your Staircase (5 to 30 Steps)
Whether you have a compact loft staircase or a grand multi-floor entryway, our system scales effortlessly. The low-profile 8mm width and flexible 2.2-2.5mm thickness allow the strips to hide discretely beneath nosings, moldings, or inside drywall tracks for a modern, minimalist finish.
?? Important Ordering Note: Please ensure you select the exact number of steps and your preferred color temperature variant?aWarm White (3000K), Natural White (4000K), or Cold White (6000K)?aon the selection menu above before checking out.
Technical Specifications
| LED Density & Style | High-Density COB, 480 LEDs / meter |
| Voltage & Power | Safe Low-Voltage DC 24V | 10W per meter |
| Color Rendering Index | CRI > 90 Ra (Professional Grade) |
| Brightness Output | 1000 ~ 1100 Lumens / meter (Dimmable via Controller) |
| Strip Profile Dimensions | 1m Length x 8mm Width x 2.2~2.5mm Thickness |
| Cuttable Intercepts | Yes, cuttable every 50mm along clear marked copper pads |
| Waterproof Protection | IP30 Rating (Designed for Indoor Protected Environments) |
| Hardware Lifespan | Heavy-duty copper substrate rated for up to 50,000 hours |
What?¡¥s Included in Your Ecosystem?
- 1x KLA-STEP-07 Smart Staircase Intelligence Controller
- 2x High-Sensitivity PIR Motion Sensors (Top & Bottom entry)
- 1x Adjustable Ambient Digital Daylight Sensor
- 1x 5-Meter Extension Cable (For fluid top floor sensor positioning)
- X-Pieces 1m High-Density COB LED Strips with 30cm pre-installed Dupont wires (Quantity matches your choice of 5-30 steps)
- 2x Dedicated LED Strip Master Extension Cables
- 1x Commercial-Grade Transformer Power Supply (Includes regional plug tailored to your shipping destination: EU/US/UK/AU)
- 2x RF Remote Controllers / Wireless Surface-Mount Wall Switches
Quick DIY Installation Guide
- Clean Surfaces: Make sure each stair tread surface is flat, dry, and completely clean. Dust or residue will weaken the strong adhesive backing.
- Mount Strips: Peel the backing and press the 1-meter COB strips under the lip of each step. Trim down excess strip lengths using scissors along the 50mm crop marks if your stairs are under 1m wide.
- Set Sensors: Position the two PIR sensors at the upper and lower entry steps to capture immediate walking motion lines.
- Click Wiring: Run the pre-attached 30cm Dupont line cables from each step directly back to the central KLA-STEP-07 hub. Use extension cables for long distances.
- Power On: Connect the main controller to the provided transformer power supply, and plug the transformer into your home wall outlet.
?? CRITICAL WARNING: Never connect the intelligent step controller or the 24V COB LED strips directly to home AC 220V power outlets. Doing so will immediately burn out the micro-circuits. The system must always run through the included low-voltage transformer power supply.
Frequently Asked Questions
How does the wireless wall switch constant mode differ from motion sensing?
Our system includes two RF wireless wall switches. Standard motion sensors only turn on when movement is detected. By clicking the wall switch, you override the sensors and force the staircase into an "always-on" accent light. Pressing it again switches it back to automatic sensor standby.
Can the COB LED stair strips be cut to fit narrower steps?
Yes. The high-density 24V COB strips can be easily cut with household scissors every 50mm along the designated copper joint pads. This allows you to fit custom step widths perfectly without losing functionality.
Are these indoor stair lights waterproof for outdoor steps?
This kit has an IP30 non-waterproof rating, meaning it is designed strictly for protected indoor domestic spaces. It should not be used on exposed outdoor paths, open decks, or areas directly open to rain and moisture.
How does the daylight sensor save electricity during the day?
The integrated light sensor tracks ambient brightness. If your staircase is flooded with natural sunlight during the day, the controller blocks the LEDs from turning on when you walk past, reducing standby energy consumption.
Can I adjust the speed of the step-by-step illumination?
Absolutely. The KLA-STEP-07 premium controller features 12 dynamic movement tracking modes. You can increase or decrease the cascade speed and adjust the hold-time illumination up to 120 seconds via the onboard interface.
Do I need professional electrical training to install this plug and play lighting?
No. The kit uses pre-wired insulated Dupont connectors that click together easily. Because it transforms high voltage down to a safe DC 24V low-voltage run, no complex electrical work or conduit box routing is required.
What happens if my staircase has an odd number of steps like 13 or 17?
We support customized layouts ranging from 5 up to 30 steps. Simply select the step variant bracket closest to your configuration when placing your order. The controller allows you to program the precise active output step count so unused terminals remain dark.
What is the benefit of 480 LEDs/m COB over standard 320 LEDs/m SMD strips?
Standard low-density or SMD strips create dot patterns on shiny floor surfaces. Our ultra-dense 480 LEDs/m COB configuration fuses light seamlessly across the entire length, eliminating graininess and casting a smooth continuous glow across your stairs.
Does the kit come with a localized power supply plug for my country?
Yes. Every order is automatically packed with a premium heavy-duty transformer power supply matched precisely to your region's voltage standards (available in EU, US, UK, and AU plug standards).
What is the average lifespan of these COB LED lighting modules?
Built with premium copper substrates and high-grade solid-state semiconductors, our COB LED stair lighting kits are rated for over 50,000 operational hours, providing reliable, maintenance-free performance for years to come.
Can I dim or increase the overall lighting brightness?
Yes. The main intelligence control console supports granular dimming parameters. You can easily adjust the peak brightness to create soft ambient night guidance or vibrant directional illumination.
What should I check if a specific step light doesn't turn on during setup?
First, verify the connection alignment of the quick-click Dupont terminal for that step. Ensure the polarity matches exactly. You can also recheck the step configuration counts on the central controller menu to make sure that channel output is enabled.
Upgrade Your Home's Architectural Experience
Bring safety, contemporary luxury, and premium intelligent lighting into your daily living space. Select your step count configuration and color tone preferences above to secure your complete MALIIGAZA kit today.
