Shenzhen Cooleeon Electronics Co., Ltd.
MALIIGAZA IP68 SPI RGB COB LED Strip WS2811 Addressable Outdoor Neon Light 720 LEDs/m for Pool & Landscape
MALIIGAZA IP68 SPI RGB COB LED Strip WS2811 Addressable Outdoor Neon Light 720 LEDs/m for Pool & Landscape
Verfügbarkeit für Abholungen konnte nicht geladen werden
MALIIGAZA P68 is a premium IP68 waterproof SPI RGB COB LED strip designed for smooth addressable color effects indoors and outdoors. With 720 LEDs per meter, WS2811 control, a frosted silicone jacket and flexible low-voltage construction, it delivers bright, uniform color-chasing light with a refined dot-free appearance.
Smooth Addressable RGB Lighting Built for Demanding Installations
Create flowing color effects, chasing animations, dynamic RGB scenes or static colors with a high-density COB strip designed to look as premium when switched off as it does when illuminated.
The P68 combines 720 LEDs/m, WS2811 addressable control and a specially processed silicone outer jacket to produce soft, even light while providing IP68 protection against water, dust and demanding outdoor environments.
Why Choose the P68 RGB COB LED Strip?
720 LEDs Per Meter
High-density COB construction creates bright, continuous-looking illumination with a smooth visual finish.
Addressable WS2811 RGB
Supports dynamic chasing, flowing color effects and static RGB colors when connected to a compatible SPI RGB controller.
IP68 Waterproof Design
The silicone-encapsulated strip is designed for high-moisture, outdoor and water-exposed applications when installed and sealed correctly.
Premium Silicone Finish
A frosted, surface-treated silicone jacket gives the strip a smooth feel while helping resist dust and dirt.
Premium Lighting Performance
Addressable RGB With Dynamic Color Effects
The built-in WS2811 IC system allows a compatible SPI controller to create running lights, flowing colors, chasing sequences and a wide range of static RGB colors.
One WS2811 IC Every 50 mm
The strip uses 20 WS2811 ICs per meter. Each 50 mm control segment provides structured addressable lighting effects while also defining the smallest specified cutting unit.
Frosted Silicone for Softer, More Uniform Light
The white or black silicone sleeve uses a specially processed frosted surface that softens the visible light and helps create a smoother, more refined appearance than exposed conventional LED strips.
Flexible Installation With Adhesive Backing
The strip is flexible and includes adhesive backing for convenient positioning. For outdoor, wet or long-term installations, additional mounting clips are strongly recommended instead of relying on adhesive alone.
SPI RGB Controller Compatibility
The P68 is an SPI addressable RGB LED strip and must be connected to a compatible SPI RGB controller.
Standard non-addressable RGB controllers, single-color dimmers and incompatible controller types will not operate this strip correctly.
Longer Runs Up to 10 Meters
The P68 is available in multiple lengths, with the 10-meter version specified for 24V operation. Its high-quality strip construction is designed to minimize visible voltage drop across long installations.
Additional power-injection wires are provided at the strip ends to support power supplementation when required for longer or more demanding installations.
Indoor and Outdoor Application Ideas
High-waterproofing decorative lighting applications.
Color effects for gardens, parks and architectural features.
Flexible RGB accent lighting for rooflines and structures.
Premium ambient lighting for residential and decorative projects.
Dynamic RGB sequences for seasonal and event decoration.
Custom addressable lighting installations for experienced DIY users.
Technical Specifications
| Model | P68 |
| Lighting Type | SPI addressable RGB COB LED strip |
| IC Type | WS2811 |
| IC Quantity | 20 ICs/m |
| LED Density | 720 LEDs/m |
| Input Voltage | DC 12V / DC 24V depending on selected variant |
| Power | 15W/m |
| Ra | >90 |
| Waterproof Rating | IP68 |
| Strip Width | 12 mm |
| Strip Thickness | 6 mm |
| Smallest Cut Unit | 50 mm |
| Available Lengths | 1 m / 2 m / 3 m / 5 m / 10 m |
| 10 m Version | 24V specified |
| Silicone Jacket Color | White / Black |
Package Includes
- 1 x P68 SPI RGB COB LED Strip in your selected variant
Installation Guide
- Confirm whether your selected strip is the DC 12V or DC 24V version.
- Prepare a compatible SPI RGB controller and a matching low-voltage power supply.
- Position the strip on a clean installation surface.
- Use the built-in adhesive for positioning and add mounting clips for outdoor, humid or long-term installations.
- Connect the LED strip to the compatible SPI controller following the controller wiring instructions.
- Connect the controller to the correct DC power supply.
- If additional power is required for a longer installation, use the provided power-injection wiring appropriately.
How to Find the Cutting Position
The specified cutting interval is 50 mm. The cutting marks are located beneath the rear adhesive layer and can be seen after carefully lifting the backing.
Only cut at the designated cutting position. After cutting, the open end must be sealed with the correct end cap and waterproof sealant if waterproof performance needs to be maintained.
Troubleshooting Guide
The strip does not light
Confirm that the strip voltage matches the power supply, verify all wiring connections and make sure an SPI RGB controller is being used.
The strip lights but addressable effects do not work correctly
Check that the controller is compatible with WS2811 SPI RGB lighting and confirm that all signal and power connections follow the controller instructions.
Brightness changes across a long installation
Check power-supply capacity and use the strip's additional power-injection wiring when supplemental power is required.
The strip becomes loose outdoors
Do not rely on adhesive alone in wet or demanding environments. Add suitable mounting clips for secure mechanical fixing.
Important Notes and Safety Warnings
- Low-voltage LED strip only. Never connect the strip directly to AC 110V or AC 220V.
- Always use the correct DC 12V or DC 24V power supply for the selected strip version.
- A compatible SPI RGB controller is required. Other controller types will not operate the strip correctly.
- Controller and power supply are not included.
- Only cut the strip at the designated 50 mm cutting position.
- After cutting, reseal the open end with a suitable end cap and waterproof sealant to restore waterproof protection.
- For outdoor or wet-area installations, use additional mounting clips instead of relying only on the adhesive backing.
Frequently Asked Questions
Is the P68 an addressable RGB LED strip?
Yes. It uses WS2811 IC control and supports addressable RGB effects such as flowing colors, chasing effects and static RGB colors with a compatible SPI controller.
How many LEDs are used per meter?
The strip uses 720 LEDs per meter for dense, bright and visually smooth COB illumination.
What IC does the P68 LED strip use?
It uses WS2811 ICs at a density of 20 ICs per meter, equivalent to one IC-controlled segment every 50 mm.
Is the P68 LED strip waterproof?
The product is specified as IP68 waterproof and is designed for indoor, outdoor and high-waterproofing decorative applications when installed and sealed correctly.
Can this LED strip be used around a swimming pool?
Swimming-pool lighting is one of the specified application scenarios for this IP68 strip. Any cut ends must be correctly resealed to maintain waterproof protection.
Does the LED strip include a controller?
No. This listing includes the LED strip only. The SPI RGB controller and power supply must be purchased separately.
What type of controller do I need?
Use a controller designed for SPI addressable RGB lighting and compatible with the WS2811 IC protocol.
Can I use a normal RGB controller?
No. The P68 is an SPI addressable RGB strip and requires a compatible SPI RGB controller.
Is the strip available in 12V and 24V?
Yes. Different variants are available in DC 12V and DC 24V. The 10-meter version is specified for 24V.
Can I connect it directly to 110V or 220V AC power?
No. Never connect this low-voltage LED strip directly to AC 110V or AC 220V. Use the correct DC power supply and compatible controller.
Can the P68 LED strip be cut?
Yes. The smallest specified cut unit is 50 mm. Only cut at the marked cutting position beneath the rear adhesive layer.
Will the strip still be waterproof after cutting?
A cut end must be resealed with the correct end cap and waterproof sealant. An unsealed cut end should not be considered waterproof.
Does the strip have adhesive backing?
Yes. Adhesive backing is included. For outdoor, wet or long-term installations, additional mounting clips are recommended.
What lengths are available?
Specified length options are 1 m, 2 m, 3 m, 5 m and 10 m. Select the correct voltage and silicone-jacket color when ordering.
How do I reduce voltage drop on a longer installation?
The strip includes additional power-injection wiring at the ends. Supplemental power can be added through these wires when required for longer installations.
Build a More Refined Addressable RGB Lighting Project
Choose the P68 when your installation demands high LED density, smooth COB illumination, flexible WS2811 effects and an IP68 silicone-protected construction.
Select Your P68 VariantRecommended Accessories
Helpful Lighting Guides
- How to Choose an SPI Addressable RGB LED Strip
- 12V vs 24V LED Strips: What to Consider for Longer Runs
- How to Cut and Reseal a Waterproof LED Strip
- How Power Injection Works on Long Addressable LED Strip Installations
