Shenzhen Cooleeon Electronics Co., Ltd.
MALIIGAZA White COB LED Strip | CRI 90+, 12V/24V, 5m/10m
MALIIGAZA White COB LED Strip | CRI 90+, 12V/24V, 5m/10m
Verfügbarkeit für Abholungen konnte nicht geladen werden
MALIIGAZA high-density white COB LED strip for continuous indoor task and ambient lighting. Choose 2700K, 3000K, 4000K, or 6000K; DC12V or DC24V; a 5m or 10m reel; and one of six width/density combinations.
Is this the right white COB strip for your project?
Why choose this high-density white COB LED strip?



Choose the right white color temperature
| Option | Appearance | Common project direction |
|---|---|---|
| 2700K | Extra-warm white | Relaxed residential ambience, bedrooms, living rooms, and warm decorative coves. |
| 3000K | Warm white | Cabinets, shelves, hospitality-style interiors, and balanced warm task lighting. |
| 4000K | Natural white | Kitchens, work surfaces, displays, and modern interiors needing a neutral appearance. |
| 6000K | Cool white | Crisp accent, display, utility, or contemporary lighting where a cooler tone is preferred. |
Choose width and LED density
Choose reel length and voltage
Verified specifications
| Product type | White COB LED strip |
|---|---|
| Color temperatures | 2700K / 3000K / 4000K / 6000K |
| Color rendering | CRI 90+ |
| Input voltage options | DC12V or DC24V, selected at checkout |
| Reel lengths | 5m or 10m, selected at checkout |
| Widths and densities | 3mm · 400 LEDs/m; 5mm · 400 LEDs/m; 8mm · 312/384/480 LEDs/m; 10mm · 528 LEDs/m |
| Dimming | Compatible with a matching single-channel DC PWM dimmer |
| Ingress rating | IP30; dry indoor use |
| Connection | 2-pin wire / 5.5 × 2.5mm DC connection |
What is included?
This product page is for one COB LED strip reel in the selected color temperature, voltage, length, and width/density variant. A power supply, PWM dimmer, connectors, and mounting profile are not part of the strip selection unless the current option explicitly says otherwise.
Installation planning
- Measure the route and available mounting width, including corners, feeds, and separate sections.
- Choose one white color temperature, DC12V or DC24V, and a 5m or 10m reel.
- Size the regulated DC power supply and any PWM dimmer for the actual selected strip model and project layout.
- For a 10m run, plan voltage-drop management, feed points, cable size, and controller capacity before installation.
- Test the full reel before cutting or permanently mounting it. Cut only at the printed cut marks.
- Keep the power supply and controller accessible for inspection and maintenance.
Important compatibility and safety notes
- IP30 variants are intended for dry indoor locations and should not be exposed to water or outdoor weather.
- Never connect a 12V strip to 24V. Match the strip, power supply, dimmer, connectors, and controller voltage.
- Do not select a power supply from reel length alone; use the actual electrical specification of the chosen width/density model.
- The rear adhesive is a positioning aid; mounting performance depends on the surface, preparation, temperature, and installation method.
- Unroll the strip during full-output testing and avoid covering it with insulating material.
Frequently asked questions
Which white color temperature should I choose?
Choose 2700K for an extra-warm ambience, 3000K for warm residential and cabinet lighting, 4000K for a neutral white appearance, or 6000K for a cooler, crisper look.
Is this an RGB or color-changing strip?
No. This page offers four fixed white color temperatures. Each selected variant produces one white tone. Choose an RGB COB product when adjustable colors are required.
Can I dim the white COB LED strip?
Yes, when it is connected to a compatible single-channel DC PWM dimmer that matches the selected 12V or 24V system. The dimmer is a separate component.
Is a power supply included?
No power supply is included with the strip selection. Choose a regulated DC supply that matches the selected voltage and the actual electrical load of the width, density, and length ordered.
Should I choose a 5m or 10m reel?
Choose based on the measured material requirement, not only the longest possible run. A 10m layout needs deliberate power-distribution and voltage-drop planning and should not automatically be treated as a single end-fed run.
Which width and density should I choose?
Start with the available mounting width. Use 3mm or 5mm for narrow details; select among the 8mm densities for standard-width layouts; choose 10mm only when the mounting area fits the 528 LEDs/m option.
Can I cut the strip?
Yes, at the marked cut points printed on the selected strip. Exact spacing can vary by model and voltage, so do not use one assumed cutting interval for every variant.
Can this strip be used outdoors or in a bathroom?
The current product classification is IP30 for dry indoor use. Do not use it where the strip may be exposed to water, condensation, or outdoor weather.
What is the difference between 12V and 24V?
Both versions require matching DC power and controls. A 24V system is commonly preferred when voltage drop needs closer management over longer layouts; the final choice should follow the full project design.
Do I need an aluminum profile?
A profile is not included and is not what creates the COB strip's continuous light appearance. A compatible profile can be added for mounting, protection, or a particular finished look.
How is this page different from the multi-color single-color COB page?
This page focuses on four white color temperatures, CRI 90+, 5m/10m lengths, and six width/density combinations. The related page adds fixed decorative colors but only in 5m reels and four width/density choices.
Compare related COB lighting
Choose the white tone and physical format that fit your lighting plan
Before adding to cart, confirm color temperature, DC12V or DC24V, 5m or 10m length, and the available mounting width.
